31PCS MK8 3D Printer Nozzles Extruder for Ender 3, 0.4mm 0.1 0.2 0.3 0.5 0.6 0.8 1.0mm Nozzles with Cleaning Kit for Ender 3 V2/Pro (1.75mm Filament)

Its nice to be able to print faster or finer with these tips.

Really like the nozzles that came in this set. They were all individually packaged in small jewelers bags, sorted by sizes. The bags were clearly marked on the outside to show which sizes were in them and the nozzles had their sizes imprinted on the sides of the them and were EASY to read. I tried one out on my Ender-3 S1 Pro and it worked fine for the two prints that I have done so far, no clogs and prints looked good. Nice assortment of different size tips included in this package. I cant wait to try out some different sizes while printing different models. The included nozzle cleaning brushes look really nice and came in different sizes to clean out the different size nozzles. Highly recommend this kit for someone new to the hobby to get to test out different size nozzles to see the difference in printing. Thanks keep up the good job!!!!

You know when you need a new nozzle when the models you print start to come out just a bit off. The flat portions are not as flat, and the sharpness in some of the corners are just a bit off. A new nozzle brings back that sharpness that your printer used to have. These nozzles are very well made with very even nozzle tips as the prints come out so smooth. These are better machined than some other nozzles out there as they are finished with very smooth tip and the machining looks to be very well done as you are almost unable to see the tool markings. The laser engraving on the nozzles are deep and easy to read so some great care was taken in the manufacture of these nozzles.

I got these for a replacement nozzle set for my 3D printer. The set comes boxed with thirty-one nozzles, five cleaning needles, a storage tube for the needles, and a plastic case to store the whole lot. Nozzle sizes are 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0mm. Three of each size except ten of the 0.4mm nozzle, corresponding with the most commonly used size. Each nozzle is laser etched to denote size and each size is grouped into a small ziplock bag also labeled as to size. These have a 2mm inner opening for 1.75mm filament. The cleaning needles measure 0.2, 0.3, 0.4, 0.5 and 0.6mm and are really well made with tapered needle point tips and wire-wrapped handles for an easier grip. The nozzles themselves are CNC machined and neatly so. Fit in my heat block is smooth and tight. Time will tell regarding longevity. Being brass, they will not hold up well to abrasive filament material, but will be fine for general purpose printing. A good price for a nicely packaged assortment with accessories.

Im very happy with this set of 31PCS MK8 3D Printer Nozzles Extruder for Ender 3. The nozzles are made of high-quality brass and are fairly durable. So far, my prints are coming out nice and with no problems. They come in a variety of sizes, so I can use them for a variety of printing projects. The cleaning kit is also very helpful for keeping my nozzles clean and free of clogs. I would definitely recommend this set to anyone who owns a 3D printer.

I received 3 of each size except 0.4 which I received 10. Each nozzle is etched with its size. These look just as clean as the photos. They are good for non abrasive filaments. Use of abrasive filaments will work but will enlarge the hole over time. (Use stainless nozzles)

Nice amount of nozzles and a good variety of sizes. The pins to help with clogs are handy.

Everything looks exactly as expected. Installation was fine, only time will expose the quality but Ill update if I have more issues than usual. Ill be comparing these to the nozzles my machine came with which Ive worn out pretty quickly. Appreciate the extras, individual marking on the nozzles, separate labeled bags, a case to hold them, and the extra needles.

You get a ton of nozzles for the money. It has ten of the .4, since those are the most common, and stock on most printers. It comes with three each of the other seven(!) sizes, for a total of 31 nozzles, plus it includes four different sizes of nozzle cleaners. The variety of nozzle sizes is very nice. Before trying these, I had only ever used .4 and .6mm sizes. I tried a .4 from this set and it worked just like every other .4 Ive tried, both stock and aftermarket. I was really interested in trying a larger nozzle so I switched to one of the .8mm nozzles after testing the .4. I had to use Cura as theres no easy way to use anything other than .4 or .6 in PrusaSlicer, but thats no big deal, I use both off and on anyway. Anyway, long story short, with the right settings, mainly layer height and top and bottom layers, .8 is awesome for functional prints and prints in a third of the time as .4 with standard settings. I may even try to go even further and try the 1mm. Again, not something youd want to do with prints with tons of detail, but for functional prints its a game changer.

You get 3 of several different sizes from .1mm to 1.0mm. It also comes with several different sizes of cleaning needles. They are brass and great for heat dispersion. It comes with 3 .1 mms, 3 .2 mms, 3 .3 mms, 10 .4 mms, 3 .5 mms, 3 .6 mms, 3 .8 mms, and 3 1.0 mms. Great quality and fit for the Ender 3 pro.