31PCS MK8 3D Printer Nozzles Extruder for Ender 3, 0.4mm 0.1 0.2 0.3 0.5 0.6 0.8 1.0mm Nozzles with Cleaning Kit for Ender 3 V2/Pro (1.75mm Filament)

31 nozzles for $16 is crazy cheap, and theyre really good quality, basically the same youd get from Creality with your printer. Obviously, a ruby or diamond nozzle would have even better quality, however for the price, these are very good and there are a lot of replacements in case you mess a couple up.

You know when you need a new nozzle when the models you print start to come out just a bit off. The flat portions are not as flat, and the sharpness in some of the corners are just a bit off. A new nozzle brings back that sharpness that your printer used to have. These nozzles are very well made with very even nozzle tips as the prints come out so smooth. These are better machined than some other nozzles out there as they are finished with very smooth tip and the machining looks to be very well done as you are almost unable to see the tool markings. The laser engraving on the nozzles are deep and easy to read so some great care was taken in the manufacture of these nozzles.

I ordered this only expecting some 0.4mm nozzles, but when I opened the case, it had nozzles from 0.1-1mm which made this find even better! I definitely recommend these to anyone who wants the standard 0.4mm nozzles, but also wants to experiment with smaller/bigger nozzles.

So far I have only used the regular 0.4mm nozzle, but it works great. Same as my other nozzles, didnt have to change any settings. I wanted some 0.6mm nozzles to print a helmet, so I decided to get this multipack. So far so good!

These are separated in labeled bags which is great. usually I have to look carefully under light on assortments. They are individually marked as well. Very nice and good quality.

Just received these today. Testing out a new PEI print bed and needed to re-level so changed out my nozzle worth one of these sine I was overdue. I just tested out the 0.4mm. Wanted to make sure that the thread length was long enough and print quality was acceptable. Noticeable difference in the print quality over the old nozzle. Nice distribution of nozzle sizes as well. Also included is a cleaning needle for each size nozzle. I would recommend these nozzles.

Im very happy with this set of 31PCS MK8 3D Printer Nozzles Extruder for Ender 3. The nozzles are made of high-quality brass and are fairly durable. So far, my prints are coming out nice and with no problems. They come in a variety of sizes, so I can use them for a variety of printing projects. The cleaning kit is also very helpful for keeping my nozzles clean and free of clogs. I would definitely recommend this set to anyone who owns a 3D printer.

I got these for a replacement nozzle set for my 3D printer. The set comes boxed with thirty-one nozzles, five cleaning needles, a storage tube for the needles, and a plastic case to store the whole lot. Nozzle sizes are 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.8 and 1.0mm. Three of each size except ten of the 0.4mm nozzle, corresponding with the most commonly used size. Each nozzle is laser etched to denote size and each size is grouped into a small ziplock bag also labeled as to size. These have a 2mm inner opening for 1.75mm filament. The cleaning needles measure 0.2, 0.3, 0.4, 0.5 and 0.6mm and are really well made with tapered needle point tips and wire-wrapped handles for an easier grip. The nozzles themselves are CNC machined and neatly so. Fit in my heat block is smooth and tight. Time will tell regarding longevity. Being brass, they will not hold up well to abrasive filament material, but will be fine for general purpose printing. A good price for a nicely packaged assortment with accessories.