31PCS MK8 3D Printer Nozzles Extruder for Ender 3, 0.4mm 0.1 0.2 0.3 0.5 0.6 0.8 1.0mm Nozzles with Cleaning Kit for Ender 3 V2/Pro (1.75mm Filament)

(337 Reviews)

Price
$15.99

Quantity
(10000 available )

Total Price
Share
28 Ratings
23
4
0
1
0
Reviews
  • jc1384

    > 24 hour

    I ordered this only expecting some 0.4mm nozzles, but when I opened the case, it had nozzles from 0.1-1mm which made this find even better! I definitely recommend these to anyone who wants the standard 0.4mm nozzles, but also wants to experiment with smaller/bigger nozzles.

  • greenman

    > 24 hour

    You get a ton of nozzles for the money. It has ten of the .4, since those are the most common, and stock on most printers. It comes with three each of the other seven(!) sizes, for a total of 31 nozzles, plus it includes four different sizes of nozzle cleaners. The variety of nozzle sizes is very nice. Before trying these, I had only ever used .4 and .6mm sizes. I tried a .4 from this set and it worked just like every other .4 Ive tried, both stock and aftermarket. I was really interested in trying a larger nozzle so I switched to one of the .8mm nozzles after testing the .4. I had to use Cura as theres no easy way to use anything other than .4 or .6 in PrusaSlicer, but thats no big deal, I use both off and on anyway. Anyway, long story short, with the right settings, mainly layer height and top and bottom layers, .8 is awesome for functional prints and prints in a third of the time as .4 with standard settings. I may even try to go even further and try the 1mm. Again, not something youd want to do with prints with tons of detail, but for functional prints its a game changer.

  • spark lupus

    > 24 hour

    This little kit has very helpful little baggies all labeled respectively for the size of nozzles they contain. I was able to take all my additional nozzles and pop them in these bags, allowing me to stay a lot more organized. The needle organizes has a lid that is perfectly tight, while not being overly difficult to remove. The nozzles themselves look consistent and of standard quality for use in a variety of 3d printers! I do not have any complaints with these!

  • Randall M. Wiley

    > 24 hour

    Really like the nozzles that came in this set. They were all individually packaged in small jewelers bags, sorted by sizes. The bags were clearly marked on the outside to show which sizes were in them and the nozzles had their sizes imprinted on the sides of the them and were EASY to read. I tried one out on my Ender-3 S1 Pro and it worked fine for the two prints that I have done so far, no clogs and prints looked good. Nice assortment of different size tips included in this package. I cant wait to try out some different sizes while printing different models. The included nozzle cleaning brushes look really nice and came in different sizes to clean out the different size nozzles. Highly recommend this kit for someone new to the hobby to get to test out different size nozzles to see the difference in printing. Thanks keep up the good job!!!!

  • Ruben Cossyleon

    > 24 hour

    Its nice to be able to print faster or finer with these tips.

  • Bacon

    > 24 hour

    31 nozzles for $16 is crazy cheap, and theyre really good quality, basically the same youd get from Creality with your printer. Obviously, a ruby or diamond nozzle would have even better quality, however for the price, these are very good and there are a lot of replacements in case you mess a couple up.

  • PenKay

    > 24 hour

    31PCS MK8 3D Printer Nozzles Extruder for Ender 3, 0.4mm 0.1 0.2 0.3 0.5 0.6 0.8 1.0mm Nozzles with Cleaning Kit for Ender 3 V2/Pro (1.75mm Filament) We have 3D printer these would fit, so I requested them. This is a great assortment if you want to experiment with different tip sizes. Personally, we think the 0.1 mm tip is absurd for most people (including me) since even a small amount of dust WILL clog the tip. At the other extreme, the 1 mm tip can lay down some thick layers, but it will be at such a slow print speed with a regular MK8 hotend. Still, its a decent kit and its nice having a good set of cleaning pins. Highly recommend.

  • michele

    > 24 hour

    31PCS MK8 3D Printer Nozzles Extruder for Ender 3, 0.4mm 0.1 0.2 0.3 0.5 0.6 0.8 1.0mm Nozzles with Cleaning Kit for Ender 3 V2/Pro (1.75mm Filament) First impressions: Nice assortment of brass nozzles for 3d printers. There is a large number of nozzles I’ve never used before. I understand the different nozzle sizes are usable in many printers, you just need to allow for the new nozzle functions. Installation/setup: Use to replace worn nozzles on your 3d printer as needed. Final thoughts:These are great, there is a large amount of nozzles of varying sizes. Now I can try some printing techniques I have been reading about. I have been using my second hand printer for everything and I used one of these to replace the worn nozzle, but I recently bought the ender 3 neo and will be using it to use these others.. ⭐️1 star - I dont recommend it at all, poor quality. ⭐️⭐️ 2 stars - I dont recommend it, it has multiple faults, or a very high price. ⭐️⭐️⭐️ 3 stars - Its passable, It has some faults but the quality is ok for what it is. ⭐️⭐️⭐️⭐️ 4 stars - Product quite acceptable, it does what it promises. ⭐️⭐️⭐️⭐️⭐️ 5 stars - Product that I totally recommend.

  • KP

    > 24 hour

    I am absolutely thrilled with my purchase of the 31PCS MK8 3D Printer Nozzles Extruder for Ender 3! The variety of nozzle sizes included in the kit has allowed me to experiment with different print settings and achieve amazing results. I love that the kit comes with a cleaning kit, making it easy to keep my printer in top shape. Installation was a breeze, and I was up and running in no time. The nozzles fit perfectly on my printer, and I havent had any issues with clogging or uneven extrusion. The 0.4mm nozzle is my go-to for everyday printing, but its great to have the option to use smaller or larger nozzles depending on the project. Overall, I am extremely satisfied with the 31PCS MK8 3D Printer Nozzles Extruder for Ender 3 and would highly recommend it to anyone looking to expand their 3D printing capabilities. The quality and versatility of the nozzles, combined with the included cleaning kit, make this kit an excellent value for the price. 5 stars all around!

  • dbrain78

    > 24 hour

    You get 3 of several different sizes from .1mm to 1.0mm. It also comes with several different sizes of cleaning needles. They are brass and great for heat dispersion. It comes with 3 .1 mms, 3 .2 mms, 3 .3 mms, 10 .4 mms, 3 .5 mms, 3 .6 mms, 3 .8 mms, and 3 1.0 mms. Great quality and fit for the Ender 3 pro.

many 3D printer Nozzlesmany 3D printer Nozzles
3D printer Nozzles made of brass3D printer Nozzles made of brass

3d printer nozzle inner wall3d printer nozzle inner wall

3d printer nozzles center3d printer nozzles center

ender 3 nozzlesender 3 nozzles

Smooth Inner Wall - Easier maintenance

Our 3D printer nozzles with smooth, burr-free inner walls help the filament flow smoothly and accurately, which speeds up the printing process. Plus, it"s easier to keep the nozzle clean and avoid clogs.

High Concentricity - Geometric accuracy

High concentricity improves printing accuracy and makes the surface smoother, making the printed part stronger and more stable, ensuring optimal 3D printing performance.

Chamfered Design - Reduced clogs

The chamfered design 3d printer nozzle allows for a smooth transition between the feed opening and the inside of the nozzle. This helps to prevent the filament from getting stuck or clogged inside the nozzle.

3d printer nozzles flat surface3d printer nozzles flat surface
3d printer nozzles support3d printer nozzles support

Related products

Shop
( 1896 Reviews )
Top Selling Products