4 Inch Wire Wheel Cup Brush Set, Coarse Twisted Knotted Wire Wheel for Angle Grinder, 5/8 Inch-11 Threaded Arbor, SHITIME 0.020 Carbon Steel Wire Brush for Grinder, Deep Sanding Heavy Rust, Paint.

These work great for getting off rust. They seem to be well made. 5/8 nut makes it easy to quickly swap one out for another. Plus with the variety here, you should be able to take care of whatever you need to and get every angle.

Price was high for such a poorly made product.

I got done what I needed to, (getting a motorcycle frame to bare metal) but the cup attachment started sheding its bristles everywhere near the end of the one project. ABSOLUTELY REQUIRES FULL PPE (PERSONAL PROTECTIVE EQUIPMENT) TO USE. Was only good for one job.

Gets the job done when removing rust. These wire brushes are rated at 12,500 RPM so just make sure your grinder is rated for their use. I have the Metabo angle grinder and it’s rated at 11,500. My maintenance shop has quit a few of the Milwaukee angle grinders and they are rated at 11,000 RPM. That’s the corded ones. I didn’t check our cordless grinders but they should be below that. I would guess a couple thousand but you should always check. Never use a grinder above the RPM rating and if you do you will find out real quick why you shouldn’t. Lol. Either way they work great and I would definitely recommend this set.

Wires seem to fly out of first wheel I used. Havent checked the others yet.

Good quality - like the four different kinds - good selection. Be sure to wear safety glasses and long sleeves. As with all wire brushes, the wires fly everywhere. Good value for the money.

I tried these on my Milwaukee M18 angle grinder and these bad boys take the rust off of my skid steer bucket very quickly. I did notice only a couple of wires that came out of the wheel. Not to bad so far I would say. Defiantly wear a mask and safety glasses when working with these wheels. Rust was flying off at a quick rate so use caution with these. I did not get a chance to try out the brass one yet but it is built the same way as the other wheels so it should also hold up fine. Now I have to try these out on other projects I have around home. A 5 star so far for me. Thanks for reading.

Great brushes. I completely sanded down my entire flatbed and went through 2 brushes. I’ll definitely be buying these again. Great price!

I am a big fan of 3out of the 4 wire brushes on this set. The quality and workmanship of the three brushes are definitely very good. The fourth brush, the brass coated brass colored brush I am not a big fan! Because they are using a wire wheel with two dissimilar metals which is basically corrosion waiting to happen. This set would have been much better if they provided another carbon steel brush or a pure brush wire wheel. The brass wire wheel could be used for cleaning brass fittings, but using the brass coated carbon steel wire wheel on the brass fittings is not advisable because you may inadvertently embed carbon steel particles into your brass fittings which could induce corrosion in your brass fittings. If you need to clean brass or copper fittings buy a different set of wire wheels.

Use them to remove rust and other foreign junk off of shafts ,bolts. Works Great