5 Pieces Polycarbonate Sheets Clear Plastic Sheet Thin Rigid Plastic Sheet Clear Polycarbonate Sheet Shatter Resistant Plastic Sheets for DIY Crafts Document Picture Frames (12 x 12 x 0.02 Inches)

I needed some Plexiglas equivalent to make a secondary windshield that would redirect the wind up when I raise my motorcycle original windshield. It needed to be thin as otherwise the screws that would hold it in place would no longer be aligned with the parts they belong to, and it needed to be resistant to withstand the wind pressure. The first part I had made was with a different material, too brittle. After a year of good service, it finally shattered on a 485 miles road trip. Enter this material. Easy to cut, very transparent, flexible and thin enough. Perfect. For MY job.

I got green polycarbonate sheets when the description says clear

I couldnt find a decent aftermarket lens for my Miller Classic welding helmet and the OEM is just to ridiculously expensive. While the OEM lens is thicker at 1mm, the inner lens is mostly just a dirt shield for the auto-darkening lens and is not a safety feature (thats my opinion). And because the material is so thin, it easily cuts on my paper cutter. You could just as easy use a pair of scissors too. And for $12, Ill probably never have to buy another inner lens. Sheets come with protective plastic on BOTH sides. One side is green and its obvious, but the other side is clear, so remember to peel that side off too!

I almost returned them because of a cloudy surface but it was just the very thin protective film. Once that was removed the sheets are very clear and uniform. Perfect for dollhouse windows.

polycarbonate sheets are large and can be easily cut.

The plastic claimed to be clear but was not at all clear. It definitely is cloudy.

Worked perfectly for my craft project!

Using as license plate cover. They have a blue tint but it us due to a shear protective layer that is removed on both sides.

Item doesn’t measure.02 thick Very misleading

Very brittle once heat is added and allowed to cool. Its not worth the buy for thermoforming purposes and I felt like I wasted money on buying this.