8 Pieces 3D Printer Heatbed Parts Silicone Leveling Solid Bed Mount 3D Printer Heatbed Part Stable Hotbed Heat-Resistant Buffer Compatible with CR-10 Ender 3 Bottom Connect (Black,0.63 Inch, 0.7 Inch)

Missing one of the larger ones. Received 5 instead of 6 and the 2 small ones.

I replaced the stock leveling springs with these on my Ender 3. Combined with a bed Auto-Leveler like the CR-Touch they make a huge difference in keeping the bed level.

I did not use these pieces as intended, but they worked great for me anyway…Hopefully this review helps someone else! I needed something to put on top of a toaster oven that gets quite hot so it could hold items stacked on top of it (small kitchen, need to use all surfaces) without melting or causing a fire. I saw a heat resistant cutting board with legs (for necessary air circulation) designed for toaster ovens on Amazon that was too big for my small toaster oven, so I set out to make my own. Finding a heat resistant cutting board (bamboo) that was the correct size was easy enough, but I could not find short (1/2 to 3/4 inch height), small diameter, inexpensive heat resistant legs. These cylinder printer heatbed roller pieces popped up, and appeared to be exactly what I was looking for so I gave them a try. A little gorilla glue made them stick and viola…my cutting board has legs! No problems at all on top of a frequently used toaster oven!

Have a caliper on hand if you intend to use these. Was struggling to get my bed level and finally decided to measure them. The others were within .06 of each other but one was not. The one measuring 17.66 was supposed to be part of the set of 6 larger ones but due to apparent lack of QC it was noticeably different from the other 5.

Yea these are what your looking, if you need one smaller, slice a bit off.

These solid bed mounts are not solid. Kinda squishy in my opinion. I was looking for something more solid.

Simple and effective! I rarely have to make bed adjustments. I mean very rarely. And I will change out filaments frequently, without having to worry about adjusting my nozzle height.

Bought these to replace my bed springs, and they work perfectly! I havent relieved my bed in some time since I have a Cr touch!

The thing with silicone solid bed mounts is they arent really very solid if they have relief sections on either end. I assume these are for using lock nuts on the upper section, with the nuts taking up the open section. This really isnt necessary for solid bed mounts and is really an answer to a question that doesnt need to be asked. Ultimately I think 3d printed solid mounts in ABS would be better but for the most basic application, these could work. You cannot tighten much with these, as they deform and you cant get a consistent height. You would have to put them in place with very minimal torque and likely either nylok nuts or at minimum thread locker.

I got these when I installed my auto bed leveler. Theyve been working very well, no complaints here.