Accessory for iRobot Roomba 600 610 620 630 645 650 655 660 680 500 Series Model 595 Replacement Kit Replenishment iRobot Parts Set Filter Side Brush Bristle Brush Flexible Brush
-
Franie
> 24 hourAll the parts were easy to install and now my Roomba works like new
-
Maria Harris
> 24 hourIf youre like me and spent almost 3 hours looking for a brush set for your Roomba with the grey holder model 531. these ARE IT !!! The filters dont work , which is whatever but these brushes fit grey holder model 531! I bought this Roomba from someone and I felt dumb when it didnt work. The brushes were worn out so I decided to buy some. Were all good now .
-
Barbara Dlubac
> 24 hourNew inards for old roomba. Easily installed, like new again
-
Customer
> 24 hourRoomba 655. The three-handed brush has a different screw, the original screw did not work, but I used the ones which came with the package and it worked. The filters fit, will use them on a rotating basis (I vacuum daily). Roller brushes are much noisier than the original ones but vacuum still works.
-
Librarianwithkids
> 24 hourI bought this kit to replace the brushes on my roomba. The square end on the rubber brush was too big to fit in the hole on the roomba. The other brush did fit. A little disappointed.
-
ruby
> 24 hourThe price and quality of this item is good. The issue is that the side brush and screw are different than the OE and the screw and brush fell out after a few cleanings. I used loctite (a blue liquid glue to keep screws from loosening). That didnt work well because I found that the blue loctite is for metal only. I used crazy glue (ethyl cyanoacrylate) and its been holding for quite a while. I should be able to back to screw out when I need to change the brush. DO NOT over tighten the screw as it will strip the plastic motor shaft damage the Roomba.
-
J. Forget
> 24 hourGreat replacement brushes
-
TimeForWaffles
> 24 hourIt made a pretty big difference replacing all the parts. Only downside is the spinner brush didnt stay on it. It actually stripped the screw hole so I had to put the original back on. Other than that, the filter and the brushes work good. I actually could feel air blowing out of the roomba which I forgot it was powerful enough to do, so I guess I need to replace the filter more often. Overall, fairly decent.
-
Dave Funk
> 24 hourWorks perfect
-
Jean Watson
> 24 hourGreat value.