Anycubic ABS-Like + 3D Printer Resin, Toughness and Non-Brittle 405nm UV-Curing Resin, High Precision Standard Photopolymer Resin for 8K Capable LCD DLP 3D Printing (Grey, 1kg)

Relatively ok for what it is

First time trying out ABS like resin and suprised i didnt have to adjust my settings at all. The resin smell wise is the same as other brands and the bottle was packaged nicely to avoid leaks. I did a test print and after cleaning and curing i did a few test drops and it didnt break.

Super easy to work with ABS-like resin. I was able to use my regular, default ABS resin printing settings on both of my printers and the models turned out great each time. Great bed adhesion, excellent detail, and barely any odor at all. For washing I did 15 minutes, while cure time was about 20 minutes. Here are the settings I used to achieve great results: * Printers: Mars 2 Mono, Halot One Plus * Initial exposure time: 50s * Exposure time: 4s * Rising height: 6mm * Motor speed: 1mm/s * Turn off delay: 4s * Bottom exposure layers: 10 Bottle is easy to pour from without making a mess and wasting resin. Also a plus. Really great resin, easy to print with. RECOMMENDED>

As advertised Great product Exactly what it says, it does. Another great product

Solid resin overall. Its advertised as ABS-Like and the strength is definitely higher than normal resins but not nearly as strong as true ABS. Still great to have a stronger alternative thats fairly easy to work with.

Excellent quality prints for miniature and 1/6 models my only problem its the awful smell of this type of Abs resin so gonna keep buying the standard Anycubic resin.

I have used other brands of resin in the past for ABS like. This has it beat so far. The adhesion is excellent as well as the detail PROS: Great Detail Very little smell Durrable CONS: None so far

After replacing a pet gate latch part for a third time that had again shattered under normal use, I bought a bottle of this resin. This part has outlasted the other three and shows no signs of wear. The previous parts started eroding where it contacted the metal of the frame, but this part looks like new. If I had an FDM printer I probably would have had a bit better luck the first time, but having only the one SLA printer, I find this to be a good solution.

This ABS-Like resin is similar to most ABS-Like resins out in the market currently. It prints well, with good detail, and with slight flexibility depending on how long you cure the end product for. The pictures are a tad misleading, as you really wont get that springy flexibility unless you barely cure the end product. However, for most resin projects this really wont matter. I print miniatures on my resin printers for tabletop games, and this resin works fine for that purpose. Like most ABS-Like resins, it has good adhesion, and prints with nice detail on a mono printer. For reference, on my Mars 3 I use an exposure time of around 1.9 seconds. If you are looking for something that is going to be extremely flexible, you might need to add some SirayaTech Tenacious to this resin as a blend. Even an amount as low as 20 percent Tenacious would help tremendously with flexibility. Overall, Id recommend this resin for anybody that enjoys resin printing!

Great detail and clean instructions with first layer time and consecutive line times.