ANYCUBIC Tough Resin, 3D Printer Resin with High Precision and High Toughness, 365-405nm Fast Curing 3D Resin for 4K 8K LCD/DLP/SLA 3D Printing (Grey, 1kg)

My go-to resin has been a 75/25 blend of Anycubic Craftsman (now out of production) & Tough resins. I bought a new .5 liter bottle of Tough and added it to some known-good Craftsman and Standard resins (all resins gray color). I was unable to get a single successful print with either blend. I substantially upped the exposure time and tried printing a Siraya Tech calibration model. The only thing on the build plate was the burn-in layers, and that had minimal adhesion. I have contacted Anycubics support, but I cannot recommend the current (Aug-Sep 2022) batch of Tough resin.

I have already printed a few parts with the Red and I am pleased by the result! The color is smooth and nice, not too clear, not too dark ... just on the right spot. I used an exposure of 8 seconds on the Photon S, the support were easy to detach, the details were perfect and the resin properly cured (not sticky at all). The part were cleaned with some IPA and went under the UV for a few minutes. The cogs on the pictures are for a big dice. I strongly recommend this color.

i used the resin it self and added 2 to 3 coats and let it slowly cure to get rid of the layer lines. in the image the model is fully dried but looks wet as it did coming off the build plate. NICE when i say NO Layer lines i mean ZERO i have a 300x magnifying glass that cant see the layer lines

very good, strong and opaque photopolymer! I am delighted! I will only buy these from now on!

Anicubic is one of the best printers on the market. This red resin is beautiful and easy to use. I highly recommend the Anycubic red resin

This resin prints pretty good. I did not have issues that were the resins fault. I did think that the resin printed more opaque than i thought it would be. But that is not the resins fault but more of my issues of what i thought i was getting. So the pictures are what your resin would turn out to be. I mean you are not really going to be using it as is and it most likely will be coated/painted

Excelente producto

I mix this with standard resin to add durability, seems to work as most of my miniatures dont snap from a small drop on the concrete anymore.

One of the biggest problems that I encounter with resin 3D printing is brittleness. I noticed that if I mix this resin into regular resin at at least 20:80 (I sometimes use 50:50), the resulting prints are much less prone to breaking. I have tried grey and white and both work equally well. Highly recommend!

Bottle cap was broken upon arrival and leaking.