ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Saptarshi Choudhury
> 3 day# Go for this product if you are truly looking for thermal paste solution for your gaming or high performance laptop / desktops.
-
Hardik Bhola
Greater than one weekApplied on PS4.. and it’s been 1 month and have seen improvement in loading time. Hope it stays the same for at least 2 years
-
Nathaniel
> 3 dayGets the job done
-
Yohow
> 3 dayPues es la que uso desde hace mucho tiempo y lo cierto es que se nota, este año sacaron una edición nueva que es prácticamente la anterior pero al menos está de oferta, de momento no tengo queja, ni mis clientes, no cristaliza con lo cual mantiene muy bien sus propiedades, aunque pone que dura hasta 8 años, suelo cambiarla mucho antes. Gran producto y gran relación calidad/precio si compras la de 4gr
-
alfonso
> 3 dayMuy buen articulo
-
Lalo
> 3 dayAl trabajar con programas 3D como maya y edición de video como Adobe After Effects, estos generan una carga de trabajo al renderizar, siendo un proceso que puede tardar varios minutos 15 min o 35 min. en mi caso.
-
Faucon guillaume
> 3 daySa fait 18mois que jai changé la pâte thermique de ma PS4 avec une utilisation intensive au quotidien et elle commence à chauffer un peu donc à prévoir dici peu mais bonne tenu. Bon rapport qualité/prix .
-
Parker
> 3 dayIts been over 3 years since I replaced the paste. I saw my CPU temp dropped 5-10 degrees... Ill save the rest and apply every 2 years. I use the one drop in the middle.
-
G.D
Greater than one weekAlso ich bin absolut begeistert von der Paste.
-
Frederick Z
> 3 dayUsed this on 2 ps4s.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
