ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive

(302 Reviews)

Price
$4.38

Quantity
(10000 available )

Total Price
Share
4844 Ratings
3947
684
138
30
45
Reviews
  • Young

    > 3 day

    I purchased this one (current edition) to apply it to i7-10700k with Dark Rock Pro 4 cooler. Could not handle well when overclocking to 5.1GHZ. The paste is of low viscosity, very watery. Not sure if it is fake. (So many MX-4 sellers from Amazon.com.) Switched to Noctua NT-H1. Now exactly the same configuration, except different thermal paste, i7-10700k rocks at 5.1GHZ with no thermal throttling. Back in 2018 the MX-4 I got was a genuine one, pretty much like Noctua NT-H1, and it was not watery. But this current edition water-like MX-4 is a joke!

  • Zhiend

    > 3 day

    Seit ich die Paste benutzt hab will meine playsi nicht mehr fliegen .

  • Vicente Salazar

    > 3 day

    una pieza te dura como para dos equipos, la utilize para el procesador y la tarjeta de video en una laptop. 10/10

  • Buen producto

    > 3 day

    Buena para enfriamiento de tarjetas de video y cpu

  • Roy Taylor

    > 3 day

    The best method of delivery of a small amount to an infrequent user/rebuilder. Over the years I have discarded more paste than I have used. The syringe delivery is precise and clean. A good choice.

  • Royce Green

    > 3 day

    Muito bom o produto, apliquei tanto para o ps4, e quanto para o PC. E até o momento esta atingindo suas necessidades.

  • Daniel

    > 3 day

    Die Wärmeleitpaste lässt sich ziemlich schwierig auftragen und noch schwieriger wieder vom CPU entfernen. Ich habe genügend Paste aufgetragen, aber hatte nach ca. 6 Monaten große Schwierigkeiten den Lüfter vom CPU zu trennen. Da habe ich schon deutlich hochwertigere und bessere Wärmeleitpaste gehabt.

  • Alex

    > 3 day

    Used on my laptop. My CPU was overheating in idle to 70 - 80 degrees, after clean-up and using this thermal paste it gone down to 40 - 50 degrees in idle and 60 - 80 in gaming.

  • Javi redline

    > 3 day

    Muy buenas pasta termica por el precio que tienen, aun que valiera mas seguiría siendo una gran opcion, estuve comparando con otras marcas y por relación calidad precio era la que mas me convenció. No puedo dar datos de temperaturas ya que se cambio a la vez el disipador, pero rinde muy bien segun las mediciones que tenia de referencia con el disipador que estoy utilizando, incluso un par de grados por de bajo siendo verano y con temperatura ambiente de mas de 30°

  • William

    Greater than one week

    Im running my Intel core I7 10700k at 5.2 MHz stable with air cooling!

MX-4MX-4

Excellent thermal conductivityExcellent thermal conductivity

Easy applicationEasy application

Secure usageSecure usage

Often copied, but never equaledOften copied, but never equaled

High thermal conductivity

The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission.

Easy application

Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers.

Secure usage

In contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.

100 % original through Authenticity Check

To ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes.

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS

Technical Specifications

Density: 2.50 g/cm³

Viscosity: 31,600 Poise

Volume Resistivity: 3.8 X 10¹³ Ω-cm

Continuous Use Temperature: -50~150 °C

Colour: Grey

MX-4 MX-4 MX-2 MX-6 MX Cleaner TP-3: Premium Performance Thermal Pad
MX-4 MX-4 (incl. Spatula) MX-2 MX-6 MX-6 (incl. MX Cleaner) MX Cleaner
Dimensions / / / / / 115 x 115 mm
Thickness / / / / / /
Continuous Use Temperature -50~150 ℃ -50~150 ℃ 0~150 ℃ -50~150 ℃ -50~150 ℃ /
Volume Resistivity 3.8 X 10¹³ Ω-cm 3.8 X 10¹³ Ω-cm 1.22 X 10¹² Ω-cm 1.8 X 10¹² Ω-cm 1.8 X 10¹² Ω-cm /
Viscosity 31,600 Poise 31,600 Poise 850 Poise 45,000 Poise 45,000 Poise /
FooterFooter

Related products

Shop
Marcie Digital Products
Marcie Digital Products
( 2117 Reviews )
Visit Store
Top Selling Products