ARCTIC MX-4 (4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive, Non-capacitive
-
Malik K.
> 3 dayI used it for my ps4 pro which started to sound like a jet plane taking off every time a graphic heavy game I would turn on. After cleaning my ps4 and refreshing with this heat paste. I put to to test for 12 hours non stop game play different games abd it’s performed great so far. Runs quieter and cooler. Also the syringe dispenser is very easy to use. You don’t waste any product.
-
GoneToTheWolves
> 3 dayHier lohnt es sich nicht zu sparen und daher immer der Griff zur MX-4!
-
Patrick
> 3 daySilver compound thermal paste is electrically conductive. Bad news if you get it on the wrong bits of your CPU. This product does a fabulous job of transferring heat without being an inadvertent jumper. I replaced the crusty compound on my 2011 MacBook Pro and it lowered my idle temps 10 degrees, and the unit now rarely sees 90* C. My MBP was NOT dusty to begin with, so I know the compound is solely responsible for the drop in temps. Highly recommended.
-
Angel
> 3 dayMuy contento con este producto, he conseguido que mi Ps4 no suene como si fuese a despegar, es más no se escucha más que el sonido del pi cuando la enciendes!!! Excelente producto. Ahora solo me queda evaluar la durabilidad ya que lo he usado hace un mes.
-
Runfola
Greater than one weekTrés satisfait.
-
clément bonnouvrier
> 3 dayMon processeur na aucun problème de surchauffe je recommande
-
Kellen Nolan
> 3 dayIt works! cooled down my cpu by 10°c
-
Mr. Clani
> 3 dayKaufe ich seit Jahren und im Angebot gleich mal mehrere Bestellt. Trage meist 2-3x im Jahr neue Wärmeleitpaste auf. Zudem kann man immer mal was auf Lager haben, falls Freunde mal wieder oder man selbst Probleme mit ihrer CPU haben.
-
BARBARA RABKA
> 3 dayNajlepsza pasta termo ! GORĄCO POLECAM !
-
Carlos
> 3 dayEscogí esta pasta térmica ya que tenía muy buenos comentarios además de que en varios foros y vídeos mencionan que esta pasta térmica es muy buena en calidad-precio, pero no me funciono, las temperaturas se elevaron 6°C en mi CPU (tengo un 5 5600x con un cooler HYPER 212 led) y 4°C en mi tarjeta grafica (Radeon rx 5700 xt) antes de cambiarla mis temperaturas llegaban a 45° o 55° estando en uso y en 32° sin uso, ahora llegan hasta 68° en uso y 40° sin uso y en la tarjeta en uso de 45° a 50° y en reposo de 34° a 38°, al principio pensé que aplique mal la pasta ya que es lo más común que puede pasar al colocar pasta térmica pero no fue el caso, ya que la cambié tres veces y aplique un poco más antes que se me acabara, pero las temperaturas nunca cambiaron, es lamentable porque esperaba mucho pero me decepcionó, no se que paso, es posible que me haya tocado una vieja pero lo dudo, asi que no se si sea buena opción, creo que sería mejor esperar y ahorrar para comprar una buena pasta termica.
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
Related products
