ARCTIC MX-4 (incl. Spatula, 4 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive
-
Kai86
> 3 dayThis stuff is thick, I mean it will spread like jiff on a cold winter morning. This will make you remember grandmas house as it spreads so easily across the top of your CPU or VRM. Dont worry though as this baby is non conductive so you wont have to worry about any oops or buttfingers leaving you high and dry. Just slap this on and let her rip.
-
Senior
> 3 dayUse Artic for home builds since 1988, wouldnt use anything else
-
Thiago
> 3 dayExatamente como esperado.
-
Jay
> 3 dayUsed it when I built my pcs and had awesome results, used it a few years later on my ps4 pro which sounded like a jet. Now my ps4 is quiet even when play warzone 2
-
Nicholas Coon
> 3 dayLove this thermal paste
-
Hawkins Holden
> 3 dayIt works just fine.
-
Arianna
> 3 dayUnless you have multiple needs you won’t need this large of a tube but if it’s the only choice to stay brand specific I highly recommend you do the job right the first time and use Arctic thermal paste. Grab your latex gloves, apply a small drop, assemble, and let it squish out. If you’re one with OCD and insist in spreading yourself think twice unless you’re certain you can apply without using too much or too little leaving air bubbles that could cause hot spots. By applying a small drop it squeezes out evenly as you fasten down your heat sink. Snap cap back on, toss gloves, clean up work area and you’re all ready to test drive your new CPU.
-
Jack Jianshe
> 3 dayDoes what it should
-
joshua noel
> 3 dayMui bueno.
-
Joshua Diggs
> 3 dayTemps dropped 6-9 degrees across all cores!
|
|
|
|
|
|---|---|---|---|
High thermal conductivityThe surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission. |
Easy applicationThanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers. |
Secure usageIn contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal. |
100 % original through Authenticity CheckTo ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes. |
Technical Specifications
Density: 2.50 g/cm³
Viscosity: 31,600 Poise
Volume Resistivity: 3.8 X 10¹³ Ω-cm
Continuous Use Temperature: -50~150 °C
Colour: Grey
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| MX-4 | MX-4 (incl. Spatula) | MX-2 | MX-6 | MX-6 (incl. MX Cleaner) | MX Cleaner | |
| Dimensions | / | / | / | / | / | 115 x 115 mm |
| Thickness | / | / | / | / | / | / |
| Continuous Use Temperature | -50~150 ℃ | -50~150 ℃ | 0~150 ℃ | -50~150 ℃ | -50~150 ℃ | / |
| Volume Resistivity | 3.8 X 10¹³ Ω-cm | 3.8 X 10¹³ Ω-cm | 1.22 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | 1.8 X 10¹² Ω-cm | / |
| Viscosity | 31,600 Poise | 31,600 Poise | 850 Poise | 45,000 Poise | 45,000 Poise | / |
