ARCTIC MX-4 (incl. Spatula, 8 g) - Premium Performance Thermal Paste for All Processors (CPU, GPU - PC, PS4, Xbox), Very high Thermal Conductivity, Long Durability, Safe Application, Non-Conductive

(1746 Reviews)

Price
$6.65

Quantity
(10000 available )

Total Price
Share
583 Ratings
492
63
10
5
13
Reviews
  • Andre Pillas

    Greater than one week

    I recently repasted my acer nitro 2018 with this and now CPU temps are at a steady 38-40 at idle and 70-80 while gaming for a few hrs already.

  • A.P.S

    > 3 day

    La durabilidad de esta parte térmica es increíble ya que en lo que algunas se degradan en menos de unos meses esta dura casi un año manteniendo la mismas cualidades, lo único es que cada vez parece que es más cara y llega a tener unos precios demasiado altos para ser solo una pasta térmica ya que con 8 gramos de durad para tres o cuatro aplicaciones únicamente.

  • J Lines

    > 3 day

    Comes out a bit fast and is a little stringy after dispensing, but its non metallic and cleaned up with alchohol.

  • Jeffrey

    Greater than one week

    Prior to using this, I was reaching temps at 95-102. Im on a laptop. I used Kryonaut and it dried out fast. I noticed my performance declined after some time. Nevertheless, I applied this awesome paste along with 2 copper shims on my GPU and CPU. Temps on extreme load 100% CPU 80-83c. GPU 100% usage at 75c max!! Great results! Most games dont run at 100% but it was great to see the results.

  • Mom2Many

    > 3 day

    It works exactly as it should. A little bit goes a long way so the tube went farther than expected.

  • Shawn Dafoe

    Greater than one week

    Its a good product .

  • duesisyt07

    > 3 day

    Ich habe erstmalig die ARCTIC MX-4 verarbeitet, zuvor habe ich immer die Arctic Silver 5 verwendet, da ich zwei identische Laptops besitze und der eine jetzt ARCTIC MX-4 hat und der andere Arctic Silver 5, kann ich sagen, die Temperaturen sind absolut identisch. Beide Wärmeleitpasten sind gleich gut aber die ARCTIC MX-4 ist günstiger. Die Verarbeitung ist auch sehr gut auch aus der 8g Packung.

  • Giuseppe Gualano

    Greater than one week

    La migliore pasta termica per rapporto qualità prezzo.

  • MM

    > 3 day

    Ist leicht aufzutragen. 1nen Klecks auf die Mitte des cpus. Kühler drauf, fertig. Hab keine Nachteile bemerkt.

  • Antonio De Matteis

    > 3 day

    Di solito uso paste a più lelevata conducibilità per il laptop. Questa, nonostante sia stata presa in estremis per un problema al portatile non ha delusi, ma non mi aspettavo nemmeno prestazioni elevatissime.

MX-4MX-4

Excellent thermal conductivityExcellent thermal conductivity

Easy applicationEasy application

Secure usageSecure usage

Often copied, but never equaledOften copied, but never equaled

High thermal conductivity

The surfaces of processor chips and cooler floors are covered with microscopic dents; ARCTIC‘s MX-4 thermal paste is composed of carbon microparticles which fill these cavities. This leads to extremely high thermal conductivity, ensuring that heat is dissipated quickly and efficiently from the CPU or GPU. With its outstanding performance, the MX-4 is not only an excellent choice for overclockers and enthusiasts, but also for other sapplications that require thermal transmission.

Easy application

Thanks to its consistency, MX-4 is easy to apply, even for beginners. The video in the picture gallery demonstrates the application technique to avoid air pockets between processors and coolers.

Secure usage

In contrast to pastes based on metal oxides or liquid metal, ARCTIC’s MX-4 is metal-free and not electrically conductive. This eliminates the risk of short circuiting, and eliminates the need to worry about corrosion damage to the radiator floor caused by liquid metal.

100 % original through Authenticity Check

To ensure that your paste is genuine, there is the ARCTIC Authenticity Check. This allows every product to be reliably verified. A counterfeit offers neither the performance nor the durability of the original ARCTIC pastes.

TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS

Technical Specifications

Density: 2.50 g/cm³

Viscosity: 31,600 Poise

Volume Resistivity: 3.8 X 10¹³ Ω-cm

Continuous Use Temperature: -50~150 °C

Colour: Grey

MX-4 MX-4 MX-2 MX-6 MX Cleaner TP-3: Premium Performance Thermal Pad
MX-4 MX-4 (incl. Spatula) MX-2 MX-6 MX-6 (incl. MX Cleaner) MX Cleaner
Dimensions / / / / / 115 x 115 mm
Thickness / / / / / /
Continuous Use Temperature -50~150 ℃ -50~150 ℃ 0~150 ℃ -50~150 ℃ -50~150 ℃ /
Volume Resistivity 3.8 X 10¹³ Ω-cm 3.8 X 10¹³ Ω-cm 1.22 X 10¹² Ω-cm 1.8 X 10¹² Ω-cm 1.8 X 10¹² Ω-cm /
Viscosity 31,600 Poise 31,600 Poise 850 Poise 45,000 Poise 45,000 Poise /
FooterFooter

Related products

Shop
Lucky Shop
Lucky Shop
( 2045 Reviews )
Visit Store
Top Selling Products