











BV-Tech 10 Port PoE+ Industrial DIN Rail Switch (8 PoE+ Ports | Gigabit Ethernet & SFP Uplink) – 96W – 802.3at
-
Mercedes Kuhlman IV
Greater than one weekGreat POE switch. Works absolutely perfect.
-
Tech Pro
> 3 dayds
-
TommyG
> 3 dayPut in place and works as advertised. Working on our phone system.
-
Brian B.
> 3 dayI stumbled across this switch when looking for a POE, environment hardened switch for a CCTV installation. I found this unit and never looked back, I have installed a lot of these units for CCTV jobs and the only issue I had was the external power supply on one unit died. I called support and the sent me replacement and I was back up and running. I have these installed inside of electrical cabinets in a parking garage and they work great.
-
J. Smith
Greater than one weekThe PoE switch has been working smoothly for a few weeks now with several web cams attached to it.
-
Shaun
> 3 dayIm using this switch to run my security camera system. The switch is currently running a mixture of POE and non POE cameras. The cameras are very stable and the switch seems to be doing its job very well. The only thing that I would say needs improvement would be that the unit does not have an internal cooling fan. The chassis of the switch gets considerably hot during normal operation and Im worried that the heat may cause damage to the switch. I plan to install an external fan to cool the unit in the future.
-
Karson Cole I
> 3 dayBest bang for the buck. Can’t speak to long term dependability yet but so far working perfectly.
-
Kendall Phillips
> 3 dayBest price for the quality and temperature rating you can find! Works great - running 8 POE 4K motorized cameras, no issues at all.
-
Earl
Greater than one weekI have this installed at my gate over 1/4 mile from our house in a concrete bunker (small shed). It connects to my home network via fiber. I have 4 security cameras, call box, router, Raspberry Pi, and Ubiquity wireless access point plugged in this 8-port (+2 fiber) switch. Five devices are PoE. I power the switch with a Meanwell 48 VDC power supply. The switch, power supply and other stuff is mounted to DIN rail on an inside wall. The entire bunker (about 30 cubic feet) is heated with a bathroom heater connected to a 110 VAC thermostat set at 40 degrees. I have had problems for years with lightning induced surges with equipment in and around this bunker. This PoE switch has given me no problems. It is unmanaged and since I no longer have VLAN requirements, unmanaged is OK with me. Even though it is not a smart switch, it does automatically understand Ethernet devices that require PoE and those that do not. The switch is simple, fast, and reliable.
-
Ryan Yetter
> 3 dayWhile this says gigabit switch, it’s not. It’s 10/100, see the pic of the product.