Cable Matters Rackmount or Wall Mount 2U 48 Port Keystone Patch Panel with Cable Management and Support Bar (19-inch Blank Patch Panel for Keystone Jacks/Keystone Panel)
-
Charles
Greater than one weekExactly what I wanted. No room for improvement! Very sturdy and well made
-
Harold Ngo
> 3 daywouldnt fit my slim monoprice jacks. The spacing between each slot is to close.
-
Daniel Ognevchuk
> 3 daySpacing is about millimeter too close, makes it much harder (Could be also the keystones...)
-
Tom L.
> 3 dayI purchased a couple of these to set up and organize my network closet at home. It fits standard keystone plug-ins and comes with a built-in tie-down for strain relief. The finish is good. The silk-screened numbers on the front (showing the port number) is clear. It fits a standard 19-inch rack spacing perfectly.
-
B. Baker
> 3 dayRight now its only half full of cat6, but Ill have plenty of space to expand and I can use just about any keystone-type connector.
-
Lyda Emard
> 3 dayThese were great for the clients budget and work for their growing network. ONLY PROBLEM is (as stated by another here) - The Keystone blanks are to close to each other. Once you get the wires punched down and into the blocks and CLOSELY trimmed the wire sticking out from the neighboring block are so close the exposed ends touch. I was able to put electrical tape over the exposed ends to cover them and not allow the next door wires make contact. YES I used the CABLE MATTERS blocks - 180005x25-BLK [UL Listed] Cable Matters 25-Pack Cat6 RJ45 Keystone Jack (Cat 6 / Cat6 Keystone Jack) in Black with Keystone Punch-Down Stand
-
Aaron Hightower
> 3 dayYeah, this along with the double-female thingys doesnt suck.
-
homer
> 3 dayI was pleasantly surprised by this. I installed Leviton keystone Jacks that I already had. They fit great. There is a place to cable tie each cable. I still need to straighten up my wires but this is much better than the three junction boxes I had before.
-
Ryan
> 3 dayThey are too close together. I had jacks shorting out other jacks. Used cablematters jacks too. Would not recommend.
-
Colin J.
> 3 dayGreat cable patch panels
Keystone Jack Convenience
The Cable Matters 2U 48-Port Keystone Blank Patch Panel leverages the convenience of keystone jacks for terminating multimedia cables in a single location. Snap in your keystone of choice for RJ45, RG6 coax, fiber, HDMI, stereo, and more. A heavy-duty strain relief bar with labeled keyholes for cable ties organizes and supports 48 cables.
Important Notes
- Wall mounting requires a bracket with clearance for the cable strain-relief bar.
- Fits standard keystone jack size. Proprietary keystone jacks must be used with the products from the same vendor.
Package Contents
- 1 x 48-Port Blank Keystone Patch Panel
- 49 x 3" Cable Ties
- 1 x Instruction Sheet
Heavy Duty Construction
1) Label spaces for printed or hand-written labels
2) Corrosion-resistant 1.5mm SPCC steel
Built-In Cable Strain Relief
3) Keyhole cable tie mounts for strain relief
4) Designed to install in a standard 19-inch rack
Note: Mounting hardware is NOT included
Snap-In Keystone Jack Insert Compatible
- RJ45 network coupler
- RJ45 jack
- LC MM Fiber coupler
- RG6 coax cable coupler
Cable Strain Relief Bar
- Heavy duty bar supports cable weight
- 48 keyholes for cable ties
- Numbered ports for organization
- Includes 49 3-inch cable ties
2U Rack-Mount
- Dimensions: (H x W) 3.5” (2U) x 19”
- Cable Bar depth: 3.3 inches
- Allow clearance for cable bar depth
- Weight: 2 lb
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 2U 48-Port Keystone Blank Patch Panel | RJ45 Port Dust Covers | 1U Wall-Mount Panel Bracket | 2U Server Rack Shelf | Shielded Patch Panel | Vertical Patch Panel | |
| UL Listed | ✓ | ✓ | ||||
| 19" Rack or Wall Mount | ✓ | ✓ | ✓ | ✓ | ||
| Number of Ports | 48-Port | n/a | n/a | 24-Port | 12-Port | |
| Mount Height | 2U | 1U | 2U | 1U | n/a | |
| Part Number | 180115 | 180113 | 180037 | 180118 | 180028 | 180058 |