Comgrow 3D Printer Warm Enclosure Fireproof and Dustproof 3D Printer Tent, PVC Laminated Polyester Constant Temperature Protective Cover Room for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 Pro

Great product, Very big with plenty of room for my creality ender v2, and saved over $10 in costs. Assembly took a minute to figure out due to no instructions, but is very straightforward. Basically attach each pole that has a letter to each pole that doesn’t have a letter, so that they are 2 poles long. Then stick them in the white adapter, so that each letter is parallel to the same letter. Definitely recommend this; don’t waster your money on a more expensive one.

I received my second cover after my first one had some issues from some rain forest carriage. after talking with customer service on this directly I received my replacement, it was very quick and after assembly this is a amazing tent for my ender 3 pro. this is very good quality, with amazing customer service.

Crealitys printing enclosures dont fix the S1 or S1 Pro very well. The medium size is a little to small, and while the s1 fits in the large size, the large size is a huge footprint. This Comgrow enclosure it right in between the sizes of the medium and the large Creality enclosures, and fits the S1 perfectly. Note: The printer pictures is the S1 Pro, Ive just swapped the half-baked touch screen for an old school LCD that works.

I bought this cover because my house gets dusty and I have two cats. Hair and dust can get trapped all around the printer and cause problems (although I didnt really see any huge problems before getting it). I got the cover as an extra measure to ensure the printer wouldnt get covered, and also to make sure the printer has a constant temperature so that the quality of a print is more consistent. This one was significantly cheaper than others I looked at, and it holds up just fine. One thing to note is that the enclosure is very large, mainly because its a more universal fit than some others. Nonetheless, it protects my ender 3 well, and traps heat extremely reliably. I do recommend getting the version without lights, as its cheaper and you can add custom lights yourself using zip ties.

It was easy to put together, and it was a lot bigger than I expected! This has great access hole for all your cables (Power, USB, etc.) Plus, they have velcro vents on the bottom rear , left and right, so they are good to stay open or shut to keep bugs and unwanted things out, or can be used for needed ventilation. It has a rubbery outer skin, and feels like its nice and thick! It has a little pouch on the front lower right side to put things in, like a micrometer, or allen wrenches, and whatever, and has a nice big front opening that zips all the way up and back to give you plenty of space to work on it, and has a real nice, clear viewing area, so you have plenty of room for needed stuff like a camera, or other things inside the enclosure. Has about 12 front and back clearance when my Ender3 is centered in it! This would be perfect for virtually any printer! I saw my friends Ender 6, and it would fit in this thing. I absolutely love it, and might even get some more of these for other stuff! You could use this as a grow box for herbs, and whatnot, or if you think outside the box, you could even use this for a bird cage cover for a well ventilated area that you could safely close the front for noise reduction, and plenty of fresh air travelling through the area, and for quiet time at night. (For bird owners) and former bird owner! It could probably handle being a sand blasting booth with a bit of skin protection added inside, but could be a candidate anyway, or just a real good spray booth for a nice and fume controllable space with exhaust available openings, but as the best thing to keep your printer nice and clean, it rocks, and is made very well! I dont mean to sound like a company sales person, which I am not, but Comgrow are the best people to buy from, and have the most fanominal customer support system that I have had the pleasure to have found, and it started when I read a review just like mine here, and read that someone bought a printer, and needed help, and was really happy to have found them also, and told of their great tech service, and after the sale care, so with that said, I just want to give back as my only other way to show my appreciation for the much needed information that gets you on the right path when you just want to learn what to do when something goes wrong, and will stay with you by staying in touch to make sure you are good to go! Its your dream come true with these folks, and they stand behind their stuff! If I could, I would buy you all one, so you would be hooked up, but I am not quite there yet, LOL, but this one is really a good buy, and just had to tell ya all about it! Thanks and Happy printing folks!

To be honest, I had not planned on purchasing this cover, but it came bundled with the Creality wash station I did want to purchase, with the bundle price less than that of the wash station alone. Go figure. But when it arrived, I realized that it was something I could genuinely use. The cover is heavy fabric with a metalized insulating layer inside. It not only blocks outside light, preserving the life of resin in the printer vat, but it also keeps the printing temperature up, useful if the surrounding room temperature is cool (as my basement tends to be in the winter, where I have my printers.)

The things it does good are - keep the air temp around the print more consistent, slow the moisture uptake on exposed rolls on the printer, look nice, and keep smells in, and pet hair out. You should take care assembling. The black rubbery coating on the outside of the shell is not very durable. Putting it over the frame on an unswept floor was enough to put small holes in it, that allow the light of my printer to seep out. Not really a huge deal, but definitely not desirable.

Would order a different brand due to the skeleton not working and needing modification to fit inside the tent. 8* of the H instead of 4*H and 4*L Would recommend getting a different brand so this risk is mitigated.

This was easy to put together, but it is too short for a base Artillery Sidewinder X1 with the spool on top. If you use a dryer box sitting on the side of the printer, like I do, it works well. I did have to cut a flap in the rear for the bed cable.

Best