Creality Official Upgrade Kit, Capricorn PTFE Bowden Tubing and Metal Feeder Extruder for Ender 3 Series, Ender 5/5 Plus/Pro, CR-10 Series 3D Printer

Awesome great product

Solid aluminum replacement for the feeder. Easy to install. Works well.

Great product! Prins very nicely.

Install was a breeze. Happy with the whole kit.

So far it works great on an Ender 3 Pro

Part quality is great! Tubing is near perfect diameter for 1.75mm filament. And is a must over factory creality tubing which allows to much play inside for filament if you want accuracy. HOWEVER, if your printer has the OEM filament detector sensor. The new metal parts are thicker than the original plastic ones and no longer align with the filament feed holes. REMOVED A STAR do to the fact that these upgrades are supposed to be made by creality themselves but their own upgraded parts were clearly never tested on their own equipment for tolerances. They should have included some kind of spacer, shim or washers to raise the factory filament detection sensor the new 1.9mm offset that is required for the filament holes from the filament sensor exit hole to line up correctly with the entrance hole of extruder. Leaving the misaligned holes can lead to filament breakage, failed prints and just general mayhem. Don’t let this deter you tho. These parts are worth it. The fix is pretty simple. The bolts that mount the sensor are M3’s so all you need is four M3 washers for each bolt to get the proper offset aligned again. You see get a visual how to put it together in my pictures. Hope this helps someone... HAPPY PRINTING..... ;)

Replaced my old stock one that broke after 3 years hopefully this one will last even longer works perfect

Nice and easy to install. Dont wait for your cheap plastic one to break. Just get this one and dont worry about it. It works exactly likes is supposed to so just stop looking and buy it.

New to 3D printing. Added the drive and tube while building my first printer do to watching tip videos. Due to this I cannot compare before and after. I can say that I have been very impressed with my print quality.

Install was on the difficult side because of the position of the motor ties & screw location between the fan / sensor.