Cudy 2023 New 30W Gigabit PoE Injector Adapter, 30W,10/100/1000Mbps RJ-45, IEEE 802.3af / 802.3at Compliant, up to 100 Meters (325 Feet), PoE200
-
Simon clare
Greater than one weekWorked perfect for a LB1121 netgear
-
Orang gila
> 3 dayNo problem
-
Deb G
> 3 dayINSTRUCTIONS WERE EASY, PLUGGED IT RIGHT IN AND EVERYTHING WORKED!
-
Jeff Childers
> 3 daySolid product. Works perfectly.
-
Guy
> 3 dayPerfect. I got this for my Rak V2 hotspot miner and wanted to go POE to clean things up and make wiring easier for outdoor. Plugs directly into my FIOS router and works. So far no issues. The only thing I do wish was the injector has tabs to mount to a wall. I have this in my kitchen and even with 3m double sided tape, the slight heat for the injector and hot summer days can make it fall off. Mounting tabs would prevent that
-
Neil Marsh
> 3 dayIt works as advertised to drive my IP phone. What else is there to say?
-
Susan H.
> 3 dayEasy to use. Application to replace normal power cord for computer kiosk unit.
-
Roberto L Ojalvo
> 3 dayThis is a great little product. It performs great and its inexpensive. Since Im now working a lot from home, Im using for my Cisco VOIP phone. It costs a lot less than the power adapter for for the phone.
-
Michaels
10-06-2025It did not power my 12v 2-5 watts Ip camera nor the Wi-Fi bridges, I would like to return item, and do U have a single 12v 2-5 watt PoE switch
-
Dave Munson
> 3 dayWorks like a charm. I use this at my home to power a wireless access point and it has never failed me.
Input Power Requirements:
- AC Input Voltage: 100~240V
- AC Input Current: 0.5A 100~240V
- AC Frequency: 50 to 60 Hz
Environmental Conditions:
- Operating Ambient Temperature: 0 to 40°C
- Operating Humidity: Maximum 85%, Non-condensing
- Storage Temperature:-40 to 40°C
- StorageHumidity: Maximum 90%, Non-condensing
Cudy 30watt Gigabit 802.11at/af PoE+ Injector
PoE Output :
- Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
- Output Power Voltage: Typical:50V, Support any 802.3af / 802.3at device (44V ~ 50V)
- User Port Power Output: 30W max
Protection:
- Over current protection
- Over load protection
- Over voltage protection
- Anti-interference protection
Application Scenario
|
|
|
|
|---|---|---|
SurveillanceWorks with IP Cameras for home and office, small business |
VoIP Conference CallWorks with VoIP phones for business conference |
Wi-Fi CoverageWorks with WiFi APs for office and business |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| POE200 | POE220 | POE300 | POE400 | PoE+ Extender | Outdoor PoE+ Extender | |
| PoE Output | 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 2 x 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 60 Watts Max, Typical Voltage: 50V53V, Support any PoE/PoE+ device (44V ~ 53V) | 90 Watts Max，Typical Voltage:56V, Support any PoE/PoE+/PoE++ device (44V ~ 56V) | 22 Watts Max, Support any PoE/PoE+ device | 25 Watts Max, Support any PoE/PoE+ device |
| 802.3af / PoE | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3at / PoE+ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3bt / PoE++ | - | - | - | ✓ | - | ✓ |
| Ethernet port | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Pin Assignment and Polarity | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) |
| Input Voltage | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | - | - |
| Over current protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over load protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over voltage protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |