Cudy 2023 New 30W Gigabit PoE Injector Adapter, 30W,10/100/1000Mbps RJ-45, IEEE 802.3af / 802.3at Compliant, up to 100 Meters (325 Feet), PoE200
-
z3scott
> 3 dayNeeded a PoE injector for an additional UniFi AP my son passed on to me. This filled the bill and has worked perfectly.
-
shytzedaka
11-06-2025Amazing quality isn’t made out of cheap plastic, great value for the money and gets the job done. Powers my Aruba AP22 Access point without a problem and it is a 30W device! Highly recommended if you’re less interested in buying a whole poe switch for much more money!
-
S. Griggs
> 3 dayDevice arrived and was easy to install, no issues with hardware.
-
Deb G
> 3 dayINSTRUCTIONS WERE EASY, PLUGGED IT RIGHT IN AND EVERYTHING WORKED!
-
JJ
> 3 daySecond time buying this! I am surprised this POE actually support 2.5Gbe ports. I have a negear 2.5gbe AP, and the POE injector actually works with that 2.5 port. I presume the protocol 802.3af/at does not care if you use 1 Gbe or 2.5 Gbe, but it is good to know that 2.5 actually also works with this POE injector!
-
Gvn Nvt
Greater than one weekPlugged it in and the Cisco IP phones powered up without a problem. Easy and inexpensive solution to adding a few VOIP phones when buying a new POE switch doesnt make economical sense.
-
Bruno C
> 3 dayWorks as intended.
-
C. Rorris
> 3 dayWorked great.
-
Mike
> 3 daypurchased for use with a Unifi Wifi 6 LR access point, works perfectly.
-
Greg
Greater than one weekGood quality
Input Power Requirements:
- AC Input Voltage: 100~240V
- AC Input Current: 0.5A 100~240V
- AC Frequency: 50 to 60 Hz
Environmental Conditions:
- Operating Ambient Temperature: 0 to 40°C
- Operating Humidity: Maximum 85%, Non-condensing
- Storage Temperature:-40 to 40°C
- StorageHumidity: Maximum 90%, Non-condensing
Cudy 30watt Gigabit 802.11at/af PoE+ Injector
PoE Output :
- Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
- Output Power Voltage: Typical:50V, Support any 802.3af / 802.3at device (44V ~ 50V)
- User Port Power Output: 30W max
Protection:
- Over current protection
- Over load protection
- Over voltage protection
- Anti-interference protection
Application Scenario
|
|
|
|
|---|---|---|
SurveillanceWorks with IP Cameras for home and office, small business |
VoIP Conference CallWorks with VoIP phones for business conference |
Wi-Fi CoverageWorks with WiFi APs for office and business |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| POE200 | POE220 | POE300 | POE400 | PoE+ Extender | Outdoor PoE+ Extender | |
| PoE Output | 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 2 x 30 Watts Max, Typical Voltage: 50V, Support any PoE/PoE+ device (44V ~ 50V) | 60 Watts Max, Typical Voltage: 50V53V, Support any PoE/PoE+ device (44V ~ 53V) | 90 Watts Max，Typical Voltage:56V, Support any PoE/PoE+/PoE++ device (44V ~ 56V) | 22 Watts Max, Support any PoE/PoE+ device | 25 Watts Max, Support any PoE/PoE+ device |
| 802.3af / PoE | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3at / PoE+ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 802.3bt / PoE++ | - | - | - | ✓ | - | ✓ |
| Ethernet port | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps | 10/100/1000 Mbps |
| Pin Assignment and Polarity | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | 1/2 (-), 3/6 (+), 4/5(+), 7/8(-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) | Input: 1/2 (-), 3/6 (+) , 7/8 (-), 4/5 (+). Output:1/2 (+), 3/6 (-) |
| Input Voltage | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | 100 ~ 240 V | - | - |
| Over current protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over load protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Over voltage protection | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |