Cut Away Machine Embroidery Stabilizer Backing 8x8 - 100 Precut Sheets - Medium Weight 2.5 Ounce - Fits 4x4 and 6x6 Hoops
-
Theresa A Faulkner
> 3 dayThere is no adhesive, but for me that wasnt a problem, there might be a spray around the edge that might work. I used 4 straight pins on top at the corners to keep the cut away from moving until the pattern is started then remove the pins. Happy with this product. Will keep on hand for more projects!!
-
donaldlowring
> 3 dayIt is just the right width
-
PMorrison
> 3 dayI wanted to like this product so much. But it gums up my needle with a ball of fuzz causing thread breaks. It is soft and feels like it works well except for the gumming up the needle
-
Donna L. Moore
09-06-2025It’s great stabilizer, easy to tear away and does great on embroidery projects!
-
Annemarie Peters
Greater than one weekWorks very well. Soft. And easy to use!
-
Krystal Sanchez
> 3 dayI absolutely love my cut away adhesion and I love the beautiful colorful threads. I will be ordering you from here on out. Your products are top notch and I trust what I purchase will be the best. Your customer service reps were very and friendly and your shipping and CS response were the best I have used yet. Thank you for your support and amazing products. I will definitely recommend to all my friends and sewing groups. Thank you again!!
-
bvksg
Greater than one weekWorks well, good price
-
eva vansickle
> 3 dayGreat product, fast shipping, and will definitely buy this stabilizer again
-
justjoan
Greater than one weekI bought this stabilizer as I use this brand of embroidery thread and like the thread. However, this stabilizer is not as substantial as the other brand I was using despite being labeled the same weight. I tried to post a picture of the two stabilizers side by side but my phone was not cooperative. This stabilizer you can practically see through, whereas my other brand you cannot. As soon as I cut a piece off the roll I could tell it was lighter. I went ahead and embroidered a snap tab using one layer of stabilizer. Sure enough, the snap tab was somewhat flimsy. I would have to use two layers which means there went any savings. I will have to send this back.
-
susana lopez
07-06-2025Cumplió todas mis expectativas fácil de usar y buena calidad
How to Choose the Right Type of Embroidery Stabilizer for Your Fabric?
A stabilizer used to support the fabric during stitching to avoid the puckering and stretching is an essential for machine embroidery. Generally, stabilizers are classified as cut away, tear away, wash away. Here we will direct you to choose the proper stabilizer for your fabric and design among New brothread machine embroidery stabilizers.
Tear Away Embroidery (Medium Weight 1.8oz)
Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery.
It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather...
Cut Away Embroidery (Medium Weight 2.5oz)
Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design.
Cut away stabilizer is considered the most stable stabilizer.
It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design.
Wash Away Embroidery Stabilizer (Light Weight 1.5oz)
If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer.
The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers.
Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace.
No Show Mesh Embroidery Stabilizer (Light Weight 1.8oz)
No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design.
No show mesh stabilizer is recommended for light colored fabrics.
It is extremely soft for baby garment and some fabric when soft is a very important consideration.
Water Soluble Topping Film (Light Weight 25Mircon))
Water Soluble Toppings are used only on the top of the fabric to control the nap of the fabric. It is best used on napped fabrics such as towels, knits, velvets, or velveteens to prevent the stitch sinking into fabric. They are too lightweight to be used as the backing stabilizer.
Fusible Iron On Embroidery Stabilizer (Light&Medium Weight)
Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop.
Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process.
Black Machine Embroidery Stabilizer Backing
Black embroidery stabilizer is very useful on similarly colored garments or fabrics.
New brothread supply 3 kinds of black embroidery stabilizer: black cut away, black tear away, black no show mesh.
Sticky Self-Adhesive Tear Away Embroidery Stabilizer Backing
Sticky Tear Away Embroidery Stabilizer is a self-adhesive tear away embroidery stabilizer which is very ideal to use on fabrics that can’t be hooped or too small to fit in a hoop. Our sticky tear away embroidery stabilizer can be torn away easily yet provides adequate stability, leaving no tears and residue.
New brothread Machine Embroidery Stabilizer Series
|
|
|
|
|
|---|---|---|---|
Cut Away Embroidery Stabilizers
|
Tear Away Embroidery Stabilizers
|
Wash Away Embroidery Stabilizers
|
No Show Mesh Embroidery Stabilizers
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer | |
| Cut Away Embroidery Stabilizer | Tear Away Embroidery Stabilizer | Wash Away Embroidery Stabilizer | No Show Mesh Embroidery Stabilizer | Fusible Iron On Embroidery Stabilizer |