Double Sided Tape, Heavy Duty Mounting Tape Clear, Vhb Waterproof Foam Tape,Special for Automobiles,for Autos, House & Office Decorations（1/4 in x 15.6ft）, Made of 3M Tape

Picture doesn’t match the product a lot smaller than I expected it’s stuck to the bag when opening the package I had to peel the plastic off piece by piece from the adhesive roll this is unnecessary and time-consuming

This tape is very tacky, conforms well to uneven surfaces and can be remove and relocated (with some effort) Only difficulty is removing the red plastic backing; its very thin and slick thus difficult to grasp, BUT that is minor compared to how well the tape works. Recommend applying the tape to one of the two surfaces to be adhered, the remove the red backing and then press the two surfaces together.

Used this to put a plastic accent strip back onto our travel trailers trim that the factory glue failed on. This tape has held up through a south Texas Summer in a RV that bakes in the sun. Factory glue didnt last two months of cool Fall weather.

I use this tape for different types of repairs. I used it on the rain guards on my trucks windows, since the manufacturers tape didnt survive the Sonoran Desert heat. It is still sticking. Just be careful what you apply the tape to, because once it cures, it can be difficult to remove.

I tried everything but can get them to keep wind deflector over my sun roof to stay attached to car. For most applications they are probably fine.

Hard to remove from roll and apply. It bunches up and cannot straighten out to apply smoothly.

Bought it to apply on after market rear bumper kit. I cleaned the area and applied the tape. I applied little heat too and put pressure for 45-60 minutes. After a day it came off. I wont be buying this product anymore

I would want that missing 1 roll fhat I paid for

This tape works well with Palram polycarbonate roof panels Easy to apply; just wipe the surface of any loose debris and dust, roll along the surface and cut with average utility shears; pull off red protective top layer once you are ready for the next sheet. Gives good adhesion between layers and doesn’t seem affected by temperature swing or moisture.

Its much to narrow and extremely difficult to disengage from roll. Will hardly use for these reasons.