Duco ABS Plastic Sheet 1/8 Inch Thick 8 x 12 - Two-Sided Rigid ABS Sheet (Textured Plastic Front & Smooth Back) - DIY Home Decor and Robotics Competitions Use - Black Plastic Sheet (Pack of1)

First, the positive: the quality and thickness of the plastic are acceptable. My sheet of ABS plastic turned out to be 7-7/8 x 11-7/8. The seller messaged me to point out that this product is manufactured to host a 1/8 tolerance. Seems like quite a coincidence that both dimensions were short by 1/8.... almost as if intended. I see in another review that the customer received an item short by 1/4 in both dimensions. Long story short (pun intended), if you need exactly 8x12, you may need to do some extra due diligence to make sure your item isnt a victim of tolerances. To the sellers credit, the return was approved.

I looked all over the place for a small sheet of black plastic. I was happy to have found this. It was slightly damaged on a small part, like it was crushed by something larger, but I didnt need that part of it so it worked out. It cut easily and worked for my project!

Took awhile to get here but it was well packaged and un damaged. Clean shiney side and textured side . Stronger than I thought it was going to be. But thats a good thing. perfect !

Well packed, excellent product. Made several repeat orders. Used as a base display work and making display boxes for art.

I used this for a replacement to the bottom panel of my RV door. A oem replacement wasn’t available but this product worked perfectly.

Seems be good grade material

This product is of extreme low quality. The so called glossy side isnt finished at all. Theres a ton of porosity. The rough side looks okay but if youre looking for something with a smooth, clean look, look elsewhere. I bought this for a custom dash install panel and its looking like Ill have to coat it with something to finish the look off myself.

Works great made a custom fit for mud flats from my side. By side was easily heated and moulded to what I needed it for great product mid flaps for my uforce 600 under the bed.

Used to fabricate a bracket for a wall mounted stick vacuum.

In some places I could just cut a 2 x 4 section of this and use plumbing ABS cement to glue the pieces to the inside cracks. Where the carrier was curved, I heated the ABS with a harbor freight hot air gun, and then with heavy gloves, held it into the curved areas until it cooled into shape. I then cleaned all parts with 90% rubbing alcohol, added ABS cement and glued into place. In areas where I filled in holes etc, using this, and a lot of ABS cement is took 3 days to finally harden, but overall very satisfied and allowed me to save my cargo carrier which was damaged after someone drove into unground garage.