ENDOZER Pro HVLP Gravity Feed Air Spray Gun High Performance Professional Painting Spray Gun 1.4mm Nozzle, 600ml for a Variety of Low Viscosity Paints

Ive waited to review until I had the chance to spray a couple things. Ive used this for spraying primer and it sprays great. Im just a diyer so I dont use a lot of professional equipment, but this gun seems professional to me. It sprays smooth and even and has 3 different adjustments. It has a knob for spray width, air pressure, and volume. Ive had nothing but good luck so far. I will update the review should anything change in the future.

Not the greatest quality but it does the job well. Great for the DIY people who use it ones in a while.

This gun was very easy to setup and also to break down and clean for later use. Most of these guns that are more budget friendly appear to be disposable but this unit cleaned up very nicely and is being stored for future use. Unlike local box store economy spray guns that get clogged needles and sticky triggers, this gun has a very professional commercial feel that you notice from the time you pick it up until you are admiring your paint job and cleaning the gun. I would recommend this product to anyone that wants to upgrade their paint spray gun or who wants to buy their first gun and have it be a quality one.

Works well and doesnt seem to clog easily like others similar to it. Its also easy to unclog if your son leaves paint in it overnight......

First impression was its small, but light and seems easy to use by reading the instructions. Im going to be painting my porches within the next couple weeks and will update this review once used but will post before and after pics!!

I have a number of refinishing projects that have been piling up and it was time to get to them. The first project was out dinette table. A beautiful solid mahogany pedestal table we got almost 20 years ago. The table is solid, but the finish on too has seen better days. So I went ahead and stripped it, sanded it, stained it, and with this sprayer, coated it with a satin polyurethane. The sprayer performed great. I can’t give the tool all of the credit, the operator had something to do with it as well ;). However, the tool worked well and didn’t prevent me from achieving a great finish. Easy to recommend this tool.

You will definitely need an air compressor and paint thinner if your using thick paint. It was ok to use. Nothing out of the ordinary. I was replacing an electrical one so all in all it gets the job done.

I did a few projects.... stain and poly, multiple coats.... the gun performed flawlessly... output is near perfect, no spitting, pattern is consistent, no clogging (I know how to treat it between uses to assure no clogging) the gun is built very robust, all metal and withstand a fall. the tank holds a good amount for most smaller projects, dont try to paint a fence with this ;) Not sure how it will fair with other types of material.... not sure I would attempt paint with it...but this will now be my GO TO for stains and poly type clear finishes for wood projects... 4.5 stars, recommended....

My major complaint is the Air control is very unstable I had to keep adjusting (and Yes I did have a Regulator on the air INLET at 24 PSI, but every time the GUN was changing like it had a mind on its own. my next gripe is the CFM consumption it looks like more an HVLP gun than an LVLP, this gun consumes around +/- 9CFM, and to the best of my understanding, an LVLP should be +/- 6 CFM or less. Unfortunately, I had to return. because outside the Gun look like a good-quality unit. ---------------------------- UPDATE ------------------ The Customer Service was very helpful and exchanged the GUN for a different one, and the latest is very good at keeping pressure as expected, CFM is still a little on the HIGH side for an LVLP but does paint beautifully, and as mentioned on my previous review the GUN look well made and SOLID so 4 stars for good customer service and a good spray gun, is a keeper now. Thanks

Used this to respray a car fender, it was way nice than my harbor freight and $50 dollar HVLP. The gun itself feels great in the hand and it has a good weight to it without being tiring. It is easy to disassemble for cleaning and the paint cup is solid as well (did not try a PPS adapter). Definitely recommend if you want to splurge on a nice gun without paying too much.