ENDOZER Pro HVLP Gravity Feed Air Spray Gun High Performance Professional Painting Spray Gun 1.4mm Nozzle, 600ml for a Variety of Low Viscosity Paints

This spray gun works great and is easy to use. It can hold up to 600ml of low-viscosity paints. Its super easy to set up and super easy to take apart. Its also very easy to get clean.

Decent product, would not say it to be professional grade. But definitely great for projects you may have around your home and has a quality build.

I recently ran into my adult sons tractor while backing out of the garage. Actually, it was one of the implements sticking off the front of the tractor and as it was low to the ground, I didnt see it. Normally, I just back out as nothing is ever in my way. Well, I had an appointment for my chemo treatment and was leaving a little early, thank goodness!!! When I heard the scraping, I immediately stopped, pulled forward, and started working my way back. His fishing boat was on the other side of me, so I was trapped between the tractor implement and the boat trailer. By the time I got out, no longer early, I had scraped up my rear bumper on both sides. Fortunately, my son is great at making cars look new. He can mend leather, polish chrome, and paint scraped bumpers!! This new ENDOZER Pro HVLP Gravity Feed Air Spray Gun High-Performance Professional Painting Spray Gun has made his job even easier!! This spray gun sprays the paint so smoothly and it looks so professional!! It looks as good as the original paint. I was lucky to get the paint from the dealership which was a perfect match. You can no longer tell that I tangled with a tractor and fishing boat trailer!! I am so glad!! I most highly recommend this air spray gun!!

I have a number of refinishing projects that have been piling up and it was time to get to them. The first project was out dinette table. A beautiful solid mahogany pedestal table we got almost 20 years ago. The table is solid, but the finish on too has seen better days. So I went ahead and stripped it, sanded it, stained it, and with this sprayer, coated it with a satin polyurethane. The sprayer performed great. I can’t give the tool all of the credit, the operator had something to do with it as well ;). However, the tool worked well and didn’t prevent me from achieving a great finish. Easy to recommend this tool.

Works well and doesnt seem to clog easily like others similar to it. Its also easy to unclog if your son leaves paint in it overnight......

Smaller than I expected, but it might be just what I need for painting some of the cabinets in the house, which is going through some renovations right now. I wish I could say more at this time, but I order it in anticipation of what I need to do. The four stars are only based on the perceived small size, but its compactness might be a good thing. I can only tell for sure when I actually use it. I tried it on a small piece of wood and it looked good, but I prefer not to say much before trying it on a final product.

When I received the Endozer LVLP spray gun it needed some modification to work properly. The needle assembly is 3mm too long causing the knob for fluid control to barely thread onto the gun. If threaded onto the gun securely the trigger would not open to allow paint flow. Just cut the 3mm nib off the back of the spray needle so total length is 110mm and not 113mm then reassemble. After mods the Endozer LVLP spray gun sprays great at as low as 20psi, but around 25psi seemed about right for proper fan and atomization. It should help to conserve paint and produce less overspray due to the lower pressure the gun requires. Problem with needle length and fluid control knob was reported to Endozer and they said it should be fixed in the next batch of spray guns, so really good customer service. This LVLP gun would be good for a DIY weekend warrior to use smaller air compressor and produce less overspray for a home garage.

The gun feels good in the hand and is easy to use. Gun sprays a much better, consistent pattern than my older, much less expensive gun. Cleaning the gun doesn’t seem to be an issue. I use paint thinner and cleaned the paint canister then sprayed it through the gun. Once the gun was fairly clean then I disassembled the gun and did a thorough cleaning of each individual part. The direction are clear and easy to understand concerning cleaning. Its important to keep a constant paint viscosity so if you are thinning the paint do the entire batch at one time or document how much paint thinner you use so you can recreate the finished result.

I ordered this for my restoration project, which is a 20yr old vehicle. Its my first, so there is a lot Im doing for the first time like spraying. This is my second HVLP gun, and this is nothing like my other unit. This is a far superior product. Im familiar with the brand, so I did not hesitate to evaluate this... First, right out of the box, picking up the gun, you can immediately tell its professional grade. The handle feels great, and best of all are the three knobs to help control your spray pattern. Unlike my other gun with fewer options, this is important for certain areas where the control comes in handy. Similarly, my other HVLP is not a gravity feed like this gun, which is preferable to keep a proper flow. Conversely, the cup holds 20oz (600ml), also much larger than my other unit. It might not seem like much, but the larger cups ultimately are more efficient by reducing the time to refill. What makes this even better is that the kit brings an extra spanner, wire brush, and 1/4 NTP plug with a filter to get you going. This gun is a game changer for DIYers. In my opinion, this takes you up several levels with your finish. Im extremely pleased with the gun and wouldnt hesitate to recommend it. My only complaint is that the gun is so good that I will have to upgrade everything else to match its performance. Nonetheless, this is a great product of great quality!

I did a few projects.... stain and poly, multiple coats.... the gun performed flawlessly... output is near perfect, no spitting, pattern is consistent, no clogging (I know how to treat it between uses to assure no clogging) the gun is built very robust, all metal and withstand a fall. the tank holds a good amount for most smaller projects, dont try to paint a fence with this ;) Not sure how it will fair with other types of material.... not sure I would attempt paint with it...but this will now be my GO TO for stains and poly type clear finishes for wood projects... 4.5 stars, recommended....