for iPad 7 7th / 8 8th Gen Screen Replacement Digitizer Touch Glass 10.2, for 7th 8th Generation A2197 A2198 A2200 A2270 A2428 A2429 A2430,+Home Button,Video Guide,Full Repair Kit

Great product and easy to install screen. Way cheaper to do it yourself instead of taking it in

I have used this product on two different iPad and both were easy to install and work flawlessly.

Good product and pretty easy to install. Also there are many videos to follow online.

I didn’t know it would come with so much help and assistance and video to show you how to do it if you don’t already know how. I was very impressed with my purchase and if I need another one in the future I will definitely order from them again

Excellent product and communication with a concern I had! Product was packaged well, comes with everything you will need minus one thing, grab you a tube of t7000/t8000 glue the pre-applied adhesive didn’t stick well for me. There is a roll of adhesive tape that comes with it, but I didn’t try to use it. Also had one issue unrelated to the product, when I disconnected the battery with a playing card I guess it didn’t have a good connection after I removed it and re-assembled the iPad. It would reboot every couple of minutes. Took the same playing card and disconnected and reconnected the battery a few times and hooked everything back up and it functioned like a brand new iPad. Also heat gun and a lot of patience is your friend, my screen was totally shattered so it took maybe an hour to get that removed and cleaned up. Attached a photo of the connector that had my iPad restarting every couple of minutes.

It had came with everything that I needed to repair the ipad screen. I followed the steps thoroughly and it was very detailed in manner. It came with all the tools, the screen , a protector for the screen and adhesive for the screen replacement. It aligned up perfectly. I would post pic of finished product but upon placing the case I had accidently broke the screen , and had learned upon turning it on that it wasnt just the top glass my lcd screen was also broke. I give this 5 stars for the directions and products being as stated and it worked well. Will be buying again in the future to finish fixing both of my ipads.

I ordered a replacement screen and thought I would be hard. I arrived and I was able to replace my screen in no time. I personally highly recommend this product!

The kit is great and excellent value - but I did not read the print that it did not support Touch ID. Otherwise I would ave given 5 star, Rating. AAlso, thoroughly review the installation process before attempting replacement - I had to send this out to a repair center as I tore off the home button connector during installation.

I bought two of these screens from the same seller in the past month. The first one was broken during installation. The second screen was installed without any problem. The iPad works like a new one except for the touch screen. In the package of my second order, there was a card saying we refund if there is an installation accident , I contacted the seller, and he/she is very responsive (within 24hr), and agreed to refund me.

Ok, so I tried two digitizers from this vendor (Goodfixer) and both of them showed key ghosting after installation so I had to return and request a refund on both. Let me review both the vendor and digitizers separately.... Digitizers: For the first digitizer, I proceeded with the installation as described in the Goodfixer video (as well as other videos indicated below), and I did test the digitizer before removing the inside protecting film, and it seemed to be working fine, however after completing the installation (including adhering to the chassis) and started to use it the key ghosting (acting like random keys were pressed) was showing, and it was not responding to any of the touch commands I was trying thru the digitizer. I thought I had done something incorrect during the installation, so I proceeded to contact Goodfixer, proceeded to re-order a 2nd one, and got my refund for the first one. When receiving the 2nd one, I was extra careful thru the installation (reviewed the videos multiple times), but just before proceeding to adhere digitizer I tested again and still saw the key ghosting in the 2nd digitizer, so started to so some research online, and came across an article where other users have noticed similar experience when replacing the digitizer, and have mentioned they needed to tape the border of the new digitizer as some of the replacement ones had some shortage issue when contacting the ipad chassis. So, thinking to give this a try decided to try on the first one, and if everything went well, will do the same on the 2nd one. So, I proceeded to put transparent tape on the bottom side of the first digitizer (to both sides of the home button), and that worked. The first digitizer was responding normally. However, when I proceeded to do the same (this time using recommended Kapton tape) to the 2nd digitizer, it still was showing the defect. I even put tape around the sides, but nothing, I could not get it to work correctly. At this moment I was not happy (given how difficult the installation is) and having to do it multiple times, and by now I had proven myself the digitizers were the problem. So, I showed my evidence to Goodfixer, and requested a refund which was honored. I proceeded to order a 3rd digitizer (from a different vendor: https://www.amazon.com/gp/product/B0857KSMDB ), and it worked as a charm from the first time. So, my son is happy but it was a very stressful time for Dad :( So, if you are going to proceed with this digitizer know beforehand there is a risk associated with it, and given how difficult the installation is you may want to weight that in your final decision. It may have work for some people, but for me it did not. Vendor: Goodfixer was very responsive, answered all my questions, and followed up thru email with the refund process, also they tried their best to be understanding and responsive even though it had turned out to be a bad experience for me given the defective product. Tips for installation: If you are going to try to install the ipad 7 digitizer, you should watch multiple videos, multiple times and follow the process (to the letter) step by step. There a few available in youtube but the two ones that help me the most were: https://www.youtube.com/watch?v=clvQI59_r0o and this one: https://www.youtube.com/watch?v=Fj86RDBwMjY Try to get a magnetic screwdriver that you can use as a backup to the one provided. Armed yourself with a lot of patience.... Hope this helps!...Good luck!