Hangman Products S2040A No Stud TV Hanger Mount TVs up to 55-Inch (Pack of 3)

I will admit I was not sure if this would be as easy as everyone said, however it was. I did have an issue that was easily solved by adding the spacers at the top to make the tv lay flat on the wall. The bottom part of my TV was bumped out and when I first tried it without additional spacers the tv would not lay flat and you could not see the tv screen it pointed to the ceiling! Used the provided spaces and problem solved! So this is a YES in my book, this is easiest one I have installed, since mine was a smaller tv, I did not have to screw a bolt into a stud and was able to use just the dry wall toggle bolts (provided).

I was very impressed by this device. I had my doubts like anyone else. It takes a hammer and a drill or screwdriver. I have 58 tvs I was installing in my apartment. This leave small holes that are easily filled with toothpaste without notice. Its very study and I never worried about it falling. The tvs are still up without incident. I highly recommend anyone to buy one of these instead of a bulky mount you need a stud to hang.

Super easy to install. Would recommend to everyone.

This product was so easy to assemble, Apartment friendly especially if your not trying to drill holes in the wall!! Get it you won’t regret it!!

They sell this at Walmart as well, which is where I originally bought this tv mount and decided to buy another one via amazon (Same price). I’m just mad that I have spent $150+ to have someone mount a tv before! I wished I knew about this then! It’s super easy! However, for my 55” tv, it was hard to screw in the wire down the middle, because you have to hang tv then tilt up and there wasn’t much space to drill. Tv pictured is a smaller tv so you can see where I drilled the wire in the wall (I think it’s a 45”?) Note that the middle hole to hammer the nails is NOT centered. I realized that after I hung the first TV (although it wasn’t off by much). For the second tv (pictured) I just measured the piece and used a pencil to mark the actual center by the nail holes on the mount. Can’t beat the price!

Ive bought TV wall-hanging kits before. They were expensive and are still in the boxes because of all the stud-finding, measuring, drilling, leveling, etc. involved. This kit was simple and fast. The only measuring was deciding how high to mount the TV, so I just decided where the top would be, attached the back hanger, lined up the wall rail on the back of the TV, and measured to determine how high the top of the wall rail should go. Then it was just a matter of tacking the nailing strip on the wall, hanging the TV and attaching the cables. For the small TV I was putting up in my bedroom, the whole process was a one-person task that took about 15 minutes and was less difficult than hanging a mirror. The only tools required are a Philips screwdriver and a small hammer. Even with an older TV with all the connections on the back rather than facing the side, the tilt allowance gave sufficient room to reach behind the TV to attach everything. I also really appreciate that the kit included screws for all the various hole sizes that the back of the TV might have, so I didnt have to guess or go out and hunt them. If you just need your TV to hang flat on the wall, this is definitely the kit to buy. Ill be ordering more of them myself.

Like many, we built a fully functional shared office in our home, and we needed (wanted) a sharable screen between our desks. We didnt need anything fancy, but we wanted to avoid bolting into studs, mostly because wed be punching into an outside wall, it creates large holes to fill later, but mostly -- the studs didnt line up where we needed them in order to center the screen exactly where it needed to be. Enter this surprising little device. Low cost, easy install and totally adjustable. Sure, the TV doesnt swivel, or spin... It just hugs the wall, but thats all we needed. Also, it doesnt have to be perfectly centered, since you attach one V shaped long bracket to your TV and drop it into the V shaped bracket on the wall. Slide the monitor side to side until its where you want it to be, and secure the lock down strap which prevents the monitor from being lifted from the track. Installation cant be easier. No bolts, no drills. Place the wall bracket where you need it, and tack it in with one of the supplied nails. Then level it, tack it in on the other side, and then add the remaining nails (there are several, but theyre similar to picture hanging nails). Once all the nails are in place, the bracket can hold a lot of weight. We will be buying more for other TVs (including a 55 plasma) that dont need to spin or swivel. Absolutely recommended.

I love the fact that it’s easy to install and my tv (55 inches) is closer to the wall. I have had mine for 3 months now. The price is fair too. I would recommend

I have always wanted a TV in my kitchen but I have an old house with lathe and plaster walls and heaven knows what is behind that. Hanging things on these walls has always been problematic as the plaster seems to crumble as soon as you get near it however, this hanging system worked great. I am a 69 year old woman and I installed this all by myself with no help and no problems. So happy that I found this product!!

I am not Handy Mandy and I do not trust myself with building, hanging or moving anything... it this right here!!!! This has changed the game for me! I can do anything after installing this.... lol. It was super easy. And my t.v is secure and still hanging in there. All I needed was a hammer and that little leveler thing and we were all set.