Hole Saw Kit, SUNGATOR 5-Piece Set. Specially Constructed Heat Treated Carbon Steel, High Precision Cutting Teeth. Cut Clean, Smooth, and Precise Holes Through Wood, Plastic, PVC Board and Drywall.

Great bi-metal saw set, not contractor grade. (But you already knew that) Nothing to complain about for me, makes holes in all sorts of things and does a good job. The first drill included was bent so the hole was out-of-round and bigger than it should have been. Removed and checked the other two INCLUDED drills and they are nice and straight. Even if they werent, drills are cheap and makes the whole thing work awesome, wish other reviewers would quit complaining about the small stuff. The hole saws themselves are deep and true, but the way they attach to the bit makes them wobble a little and therefore are not going to make a perfect hole. So you get what you pay for. However they work well and suit my needs just fine!

Was very easy to use

Drill a hole, and it wor

For a product like this you rarely use it. I wanted holes in my desktop to hide my computer wires. I have a cheap power drill and it worked, but a better quality drill is going to be needed if you need to drill a bunch of holes. To drill four holes it was a strain. The bits held up pretty well considering they were going through hard wood and the laminate on both sides about three quarters of an inch thick. You have to drill slowly so the sawdust cleans out as you go. It took probably 10-15 minutes for four holes. I would probably consider these disposable because by the fourth hole it was slow progress. I suspect the bits were beginning to dull. At the price it wouldnt be worth resharpening, but they did the job I needed.

These are not bad at all. Only reason why people keep saying it became dull is because they overheat the bits. Probably not using it with impact drill. I used it with regular drill and it worked perfect. I used it on my desk. I just had to do it for a few seconds, then spray some water and repeat. It came out great. It took about 10 minutes to drill the 1 inch thick desk because after about 2 minutes, it gets really hot. I had to dip it in cold water. If you dont cool it down and keep going, teeth will become dull due to heat

Exactly what I needed. So far I have used this to drill holes in carpeted wood, PVC, and metal. All materials cut just as easy as the rest. Great little set and works exactly as it should

I bought this to drill holes for plastic grommets for my desk to try to better organize my cables and not have to stretch them over the edge. The desk is typical engineered particle board and I wanted a reasonably priced hole saw for this. It works and does a nice job overall, but it takes a lot of patience to cut through even marginally thick engineered wood. I dont know if the saw blades will old up over time, but it works if you have patience. I also found the 2 hole saw still made a slighter bigger whole than the 2 grommets I bought, but it wasnt a show stopper for my project. I drilled the pilot hole first and then started the hole with the hole saw on both sides hoping to prevent splintering on the underside/inside of the hole and that worked well.

Before purchasing these holesaw’s I had never heard of this company but I figured for the price I would give them a try. I was pleasantly surprised, these saws are extremely sharp and cut through wood very easily. I have even used them to drill through the steel back of my toolbox, I don’t even know if the saws are rated for metal but they did cut it without dulling the blade. I have been very impressed with these and if I manage to dull or break them I will buy them again.

For a product like this you rarely use it. I wanted holes in my desktop to hide my computer wires. I have a cheap power drill and it worked, but a better quality drill is going to be needed if you need to drill a bunch of holes. To drill four holes it was a strain. The bits held up pretty well considering they were going through hard wood and the laminate on both sides about three quarters of an inch thick. You have to drill slowly so the sawdust cleans out as you go. It took probably 10-15 minutes for four holes. I would probably consider these disposable because by the fourth hole it was slow progress. I suspect the bits were beginning to dull. At the price it wouldnt be worth resharpening, but they did the job I needed.

I purchased this item to cut a hole in a 1/2” round wooden board to to use as a small umbrella table for my patio. The product does not come with directions, however, it was fairly easy to figure out, and Im in my 60’s. Worked perfectly and Im very happy with the result.