IIT Jumbo 51Pc Drum Sanding Kit - Fits Dremel - Includes Rubber Drum Mandrels - 1/2, 3/8 & 1/4

These are really good if your easy on them. I have had some of the sandpaper come apart but that was something I expected. It is worth the money to get the mandrels and they do last long enough to do quite a bit of sanding. I would buy them again.

Used for recent project.

Not sure about durability yet I put them with some other drums so I am not sure which ones I have been using.

I purchased this item because I needed the sanding drums although it came with the rubber drum mandrels, they are not tight enough to stay on the mandrel. So you have to stop and start too many times to keep putting the sand paper back on the mandrel. With that said... they work really good.

The sanding paper fits loosely in the drum, but when it is spinning, it doesnt come off. It works, but I have to be careful not to loose the sanding paper.

The drum size varies slightly but only one drum was unusable. The mandels worked as they should. The grit was a little on the coarse side but was consistent and cut well. Overall, this was a good buy

Good set, cheapest Ive seen on Amazon, The mandrels are good quality, the sanding drums are OK, at roughly .13 cents a pop should get some good use out of them.

I have had an opportunity to use the sanding drums a few times now and can say the quality is really quite good. The Dremel brand drums last a bit longer,but are much more expensive. I prefer the mandrels in this kit to the Dremel parts. I find it easier to get a snug fit, and they allow the use of a small (.5?) Phillips screwdriver. A really good value,would buy again.

Each barrel lasted about a minute

Very good. Just it had a wider variety of grit.