Leather Punch Tool,Belt Punch Tool,Leather Hole Punch,Belt Hole Puncher, Heavy Duty Leather Punching Machine is Suitable for Leather, Leather Belt, Handbag, Watch Strap, etc.
-
Adam Fischer
> 24 hourIt worked out great and I recommend this product
-
Jjmcc
> 24 hourTools a little hard on the hand but works well you must put a piece of cardboard in between the belt and the tool for it to work properly
-
Ann
> 24 hourPerformed as expected in punching a few new holes in double layer leather handbag strap. I havent used it for anything else thus cannot speak to durability, etc.
-
Emily L.
> 24 hourGood punch for the price and the steel construction makes it feel nice and sturdy.
-
Khoi Chu
> 24 hourI like it
-
LMD23060
> 24 hourI followed the instructions but it ripped the hole which made it too large for the peg to fit in. I still wear it but I don’t feel it is safe & secure, & could drop my Apple Watch! The band I ordered is colored a blue I’ve never seen before! I felt the cone cutter wasn’t sharp enough.
-
Heyli
> 24 hourLo practico, no me á grado lo muy fuerte que está para girar los tamaños
-
Andrew
> 24 hourLooks good
-
Richard
> 24 hourI picked this up to punch a new hole in my thick leather belt. I couldnt get it to completely punch through, even twisting it. I ended up having to use a small pocket knife to finish the job. That said, it helped and it was cheap, so three stars from me.
-
Bernadette Franco
> 24 hourHay que hacer mucha fuerza
Providing quality products and services to our customers is our vision
6 specification rotation
Hole diameter of rotary leather punch: 0.08/0.1/0.12/0.14/0.16 in.
The diameter of the hole is marked on the wheel, which can quickly select the required size,bring your favorite belt back to life.
Get the right fit and comfort by adding extra holes
|
|
|
|
|---|---|---|
|
Leather hole punches make it easy to adjust the fit and comfort of belts, clothing, and more （Note: the hole size of the belt is usually 3.5mm) |
Punching holes in leather, belts, bag straps, bags, paper, cards, watch straps is a very simple task. |
The min punching thickness of the punching pliers: 0.2mm (3 sheets of A4 paper), max: 7mm and suitable: 0.2-4.5mm.If the thickness is greater than 4.5mm, more effort is needed to punch holes. |
Leather punch procedure
- Three finger rotation to select specifications (lever principle saves effort)
- If the punching material is elastic, a 0.2-0.25mm cardboard needs to be placed between the material and the copper sheet.
- Press the handle after aligning the hole vertically (hear a click to complete the punching))
- After the click, rotate the punching pliers left and right (so that beautiful holes can be made)