Leather Punch Tool,Belt Punch Tool,Leather Hole Punch,Belt Hole Puncher, Heavy Duty Leather Punching Machine is Suitable for Leather, Leather Belt, Handbag, Watch Strap, etc.
-
Jjmcc
Greater than one weekTools a little hard on the hand but works well you must put a piece of cardboard in between the belt and the tool for it to work properly
-
Gigi
> 3 dayLove it! Works very good!
-
6412606673
> 3 dayWorked ok . Could be sharper!!
-
Adam Fischer
> 3 dayIt worked out great and I recommend this product
-
David D.
> 3 dayI misplaced my good 45 year old one, so I didn’t want to spend too much on another one. It seems sturdy and hopefully the punching edges hold up. I think the smallest hole punch might be a bit larger than my old tool. It was a good value for the money spent.
-
Ken
02-06-2025It’s obviously did it’s job and good for its price.
-
Leann Metz
> 3 dayJust check out simple videos first. Easy to use.
-
Culvers
> 3 dayIt works on thin wood
-
Michael Welch
> 3 dayIt doesnt work well on a heavy leather belt -- it takes quite a bit of effort and you will need something like a screwdriver to actual make the hole. It isnt that good on a lighter belt either; it takes repetitive effort to make the hole. Its disappointing...
-
Subash G, Author
Greater than one weekIts heavy and really hard to press and puncture the leather belt. Quality wise really good and super strong.
Providing quality products and services to our customers is our vision
6 specification rotation
Hole diameter of rotary leather punch: 0.08/0.1/0.12/0.14/0.16 in.
The diameter of the hole is marked on the wheel, which can quickly select the required size,bring your favorite belt back to life.
Get the right fit and comfort by adding extra holes
|
|
|
|
|---|---|---|
|
Leather hole punches make it easy to adjust the fit and comfort of belts, clothing, and more （Note: the hole size of the belt is usually 3.5mm) |
Punching holes in leather, belts, bag straps, bags, paper, cards, watch straps is a very simple task. |
The min punching thickness of the punching pliers: 0.2mm (3 sheets of A4 paper), max: 7mm and suitable: 0.2-4.5mm.If the thickness is greater than 4.5mm, more effort is needed to punch holes. |
Leather punch procedure
- Three finger rotation to select specifications (lever principle saves effort)
- If the punching material is elastic, a 0.2-0.25mm cardboard needs to be placed between the material and the copper sheet.
- Press the handle after aligning the hole vertically (hear a click to complete the punching))
- After the click, rotate the punching pliers left and right (so that beautiful holes can be made)