Leather Punch Tool,Belt Punch Tool,Leather Hole Punch,Belt Hole Puncher, Heavy Duty Leather Punching Machine is Suitable for Leather, Leather Belt, Handbag, Watch Strap, etc.
-
Rick
> 24 hourTakes a good bit of effort to punch the smaller holes but it is manageable as isn’t a tool I have to use regularly. If you have to use it on a daily basis then I’d say look elsewhere as the strain it’ll put on your hands is unnecessary.
-
Ken
> 24 hourIt’s obviously did it’s job and good for its price.
-
Peter
> 24 hourItem covered my need did what it was brought to do
-
Subash G, Author
> 24 hourIts heavy and really hard to press and puncture the leather belt. Quality wise really good and super strong.
-
Maria A. Gall
> 24 hourA+++++
-
Michael Welch
> 24 hourIt doesnt work well on a heavy leather belt -- it takes quite a bit of effort and you will need something like a screwdriver to actual make the hole. It isnt that good on a lighter belt either; it takes repetitive effort to make the hole. Its disappointing...
-
charles schranz
> 24 hournot strong enough
-
zl
> 24 hourwould recommend
-
Leann Metz
> 24 hourJust check out simple videos first. Easy to use.
-
Gigi
> 24 hourLove it! Works very good!
Providing quality products and services to our customers is our vision
6 specification rotation
Hole diameter of rotary leather punch: 0.08/0.1/0.12/0.14/0.16 in.
The diameter of the hole is marked on the wheel, which can quickly select the required size,bring your favorite belt back to life.
Get the right fit and comfort by adding extra holes
|
|
|
|
|---|---|---|
|
Leather hole punches make it easy to adjust the fit and comfort of belts, clothing, and more （Note: the hole size of the belt is usually 3.5mm) |
Punching holes in leather, belts, bag straps, bags, paper, cards, watch straps is a very simple task. |
The min punching thickness of the punching pliers: 0.2mm (3 sheets of A4 paper), max: 7mm and suitable: 0.2-4.5mm.If the thickness is greater than 4.5mm, more effort is needed to punch holes. |
Leather punch procedure
- Three finger rotation to select specifications (lever principle saves effort)
- If the punching material is elastic, a 0.2-0.25mm cardboard needs to be placed between the material and the copper sheet.
- Press the handle after aligning the hole vertically (hear a click to complete the punching))
- After the click, rotate the punching pliers left and right (so that beautiful holes can be made)