

LF10-4H
-
Edgardo Candelaria
> 24 hourPerfect fit, and easy install
-
Frank Robedeau
> 24 hourSmall and compact. Overpressure relief valve mounted on switch is vertical instead of a 90 degree conection. Gromments for wire are too large in diameter.
-
Carl ferguson
> 24 hourSatisfied
-
Brenda S.
> 24 hourExact replacement for the part I needed. Works great
-
DK
> 24 hourReplacing one that worked for about 25 years.
-
Alissa DiDonato
> 24 hourworks like the description.
-
Mark A. Cornelius
> 24 hourI bought this switch for my craftsman upright 5 hp 30 gallon compressor. It took about an hour to install. Shipping was fairly quick. It appears to be working very well. It cuts on at about 110 and off at about 140 out of the box. It is supposed to be set at 95-125 from the factory. My compressor is fairly old, about 1998, and the gauges show 20 pounds with no air in the tanks, so they could be wrong, so I didnt bother to adjust it. The switch looked exactly like the one I took off. Its a good switch for the price. Thanks Gas and Water LLC and Lefoo.
-
Cesar
> 24 hourThe shell was cracked and a few pieces broke off, but its only cosmetic. Works as it should.
-
Glenn Marchione
> 24 hourThey should ship this with adjustment instructions. There are two adjustment screws, one for the cut out and one for the differential. They are not marked and there is nothing to tell you which is which. Dont get me wrong, you will figure it out, but it would be nice to have an instruction sheet with it.
-
c5vfd
> 24 hourHad to be disassembled to correct position of discharge. Needed extra hands to accomplish. Still not sure it is working correctly.