Master Paint System MPS Disposable Paint Spray Gun Cup Liners and Lid System, 50 Pack Mini Size 6 Ounce (180ml) Kit - 50 Cup Liners, 50 Lids with Strainer, 1 Hard Cup with Retainer Ring and 20 Plugs

They are very nice product. They arent the top quality as 3M, but for the price and as many as I use....awesome and very happy. I plan to keep buying them.

These are ok you have to make sure they snap evenly for them not to leak took me a few times of it leaking to figure out why it leaking it has a ring that the top and cup have to link together like a ziplock to create a seal. Once sealed and material is used you cant refill it by openinit back up it just creates a mess might as well just make another set up. Id say great for very small touch up jobs where u use 3-4 oz of material at a time with one single use. Not the greatest but does work.

Descriptions says will fit TCP G6600, but will NOT. **edit** found a simple mod that can be done so the adapter will fit TCP 6600 HVLP gun. (btw..TCP, please send me some free stuff for doing your job for you or higher me and I can run a quick 100 adapter for customers) see pic i have attached. I have four working guns, so the easy fix was to modify the male/male adapter thats already on the gun, use Allen wrench to remove from gun, I needed a vice and hammer to break it free even in a new gun, there about a .240 lip at the top, you going to cut .200 to .230 off the lip off with a hacksaw, and use a file to level, or I used a small metal lathe to make sure I machined a flat surface. This will give you a total of 2-3/4 worth of thread engagement. I have ran 6 disposable cups worth this weekend with no problems or leaks.

Plenty of material

These work great as Im not a painter per say but these made it easy

I love these cups! Some reviews mention leaks, I have had none but probably because I am very careful assembling the cups. The liners are cool, they drop into the hard cup. Pour the paint in, then put on the top(with the feed hole and integrated filter). This is tricky, it has a number of clicks as it settles into the liner. It has to be settled all the way in, kind of subtle, I suspect if this is not done then leaks will be had. Next is to screw on the black retaining ring. This too is fiddly, very easy to cross thread. I sight from the side and watch it go on. Also when screwing it on it can be screwed on too tight and skip threads, it needs to be just tight enough. There are no directions and very few if any online tutorials so I will continue. Once filled and capped keep the cup with the orifice pointing up and push the gun onto the cup. This has a few hitches/bumps as it goes on. Once it is completely seated twist one notch for complete seal. Then attach the gun to air and pull trigger with the gun upside down and all the air will be sucked out of the cup, leaving only paint in the now collapsed liner. Very cool! This is what lets you paint upside down without sputtering, paint keeps flowing. I tried to refill a cup and it didnt go well. If I need more paint I use a new cup. If I have lots left over I put the cup on top of my paint can and let the un-used paint dribble back into the can. Overall way better than the stock metal reuse-able paint cup, I will never go back!

A must have if you are doing any kind of continuous painting. So much time and money saved on cleaning out the stock canister over and over

I like what I ordered, and I need the smaller size cups. They were on time and I like that

Worked with my 3m pps cup adapter already on my gun, cheap cups compared to the name brand 3m ones but work great will buy again

Saves some time in cleanup, but the best feature is that you can see how much paint product you have left at all times.