Micro Swiss .4mm Nozzle for Micro Swiss MK10 All Metal Hotend Upgrade Kit Only

The micro swiss all metal hotends are very nice. Just be sure to get a high temp Bowden tube, otherwise, it will start to melt.

New favorite nozzle

Zero stars

Nice nozzles! A direct fit for my Flashforge Creator Pro.

anything from microswiss is premium

Nozzles solid, but I got shipped a .2mm nozzle instead of a .6mm I guess Ill keep it and order another.

Love these things

Had to slow my print speeds to 40mm/s With PETG 1.75mm Fillament at 248C. 0.6mm Layers and 1.2mm wall (needs only one vertical perimeter because each wall is 1.2mm thick). Authentic Micro Swiss Stainless Steel! Parts are super strong!

I have a microswiss hotend on my Monoprice Maker Select so I wanted this nozzle to print wood filament since it is generally recommended to use at least 0.5 mm or bigger nozzle. This nozzle worked great for wood filament and I didnt get any clogs in the nozzle.

These were way better than what I got with my all metal hot-end kits. The hot-end kit nozzles worked good until worn out. But even then my z-height was always off a small amount. Finally discovered why, the extruded filament comes out of the nozzle with a diameter of about .6 on .4 nozzle. Replaced with this, which has a much more noticeable sharp tip and it extrudes filament right on .4mm. All my issues I had are now gone!