Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Francisco Castellon
> 3 daykeeps my pc cool
-
Diego Pombo
> 3 dayEn cuanto limpie la pasta vieja y puse la nueva, dejo de calentarse la computadora.
-
ibrahim
> 3 dayEasy to apply , works really good for GPU and CPU
-
Tai
> 3 dayI replaced the thermal paste in all my mining gpu’s. Temps went down 5 degrees. Great product!
-
Matt
Greater than one weekIts thermal paste, it sticks well and helps in keeping my CPU cool.
-
Ryan Robinson
15-06-2025Its a good product to add to the top of your processor. Not good spread on toast. DONT PUT ON TOAST!
-
Philip S.
> 3 dayPerfect
-
Mike
Greater than one weekArctic silver 5 USED to be one of the best . Now it is just ok and performs a couple degrees above most top of the line pastes. I bought this one because it was available for quick delivery but 8f I could wait I would go for zallman.
-
Alex
> 3 dayEasy to use
-
Cody
> 3 dayGreat thermal compound for heat transfer. Have build many PCs and always use artix silver. Has never let me down. Normally goes further than advertised due to the quality.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
