Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
kgb
Greater than one weekWorked great . Fixed old PS3 . Runs like new now
-
Prof. Kenya Beer MD
> 3 dayBest damn thermal paste around
-
Christian Lugo
> 3 dayPor el precio podemos encontrar mejores opciones con mejores marcas, tiene un tiempo de curado en el que no da su maximo potencial mientras otras opciones desde aplicarlo funciona al 100%, el tiempo de vida es corto por el precio
-
Robert
> 3 dayThis paste is magic, been using for years barely had to re-order. Small tube but lasts forever.
-
NORBERTO DE LA ROSA BERNAL
> 3 daySin problemas he comprado esta pasta térmica un par de veces y funciona a la perfección
-
Gloria I. Gonzalez
Greater than one weekComputadora
-
Oliver Y
11-06-2025Comes in just a plastic bag with paste and plastic spreader. Very easy to apply and then just put back the CPU heatsink. This lead to cooler CPU temps by a few degrees vs the stock Intel paste.
-
vohoang
> 3 dayit okay
-
CFrost
> 3 dayWorked better than expected.
-
Leroy Stahr
> 3 dayGood product but expensive
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
