Niteangel Anti-Slide Hamster Wheel Platform - Fits for Niteangel Super-Silent Hamster Wheel | Acrylic Wheel | Wooden Wheel | Cloud Series Hamster Wheel (Medium)

The wheel fit perfect on this. The only downside is that the legs slide on and don’t stay, so you have to use some sort of adhesive. Tape is provided, but I wouldn’t recommend using that if your hamster may try eating it. I really recommend this if you have a niteangel wheel and you need some sort of elevation or stand to put it on.

I brought the stilts into a hardware store and got more length and attached w wood glue. Works awesome and I can have 10 inch of bedding now.

The wheel fits perfectly on the wheel stand. But the attachable legs dont fit securely on the leg stubs hence falling right out when holding it up in the air and the legs being very unstable and falling out when placed in the cage on top of loose uneven bedding. I fixed this issue by gluing the legs onto the platform permanently. Now its completely fine since the legs are stuck in place. Another thing I thought couldve been better is that the platform is thicker than other Niteangel platforms, which made it impossible to use the Niteangel ladder on this wheel platform. I wanted to connect the ladder directly to the wheel but the opening on the ladder was not wide enough to be secured at the edge of the platform. I wouldnt consider this a flaw or a big issue, but just thought it wouldve been perfect if it did fit. Otherwise, it does the job once the legs are glued in place!

Does the trick for the wheel and my hamster loves to sleep under this.

The stand is necessary if the bedding is more than 8 inches thick, but it doesn’t fit well with it’s own brand. (Slightly smaller for the bottom of the wheel)

I absolutely recommend this if you have the silence spinner wheels from niteangel. I dont have to worry about the wheel Going into the bedding, or trying to find a spot to put the wheel. Over all its definitely recommended

I got for medium wheel . And I ordered right size and it was to big for the wheel bottom. Also the wheel touches the front so for a hamster to get on it would have to have a ladder or a climbing point in front

The legs keep falling out... I had to use hot glue to keep it in. the wheel fits but it cant be used if you dont have anything to keep the stilts in

They need a better design for dowels. Legs keep coming out. A screw in would be a better option

I used this product to keep my large 11.8 inch nite angel wheel on! Very sturdy and easy to assemble. Would buy again