Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
Tech4c
> 3 daythanks
-
Halil K.
> 3 dayIch habe diesen Lüfter gegen den in meinem 3D Drucker getauscht und bin beeindruckt.
-
Jesse
> 3 dayBought this to replace a noisy stock fan on my custom ender 5 head. Bolted right up as a remove and replace operation. Came with a fancy case and screw.
-
Michael M.
> 3 dayInstalled this on my Wanhao 3d printer because the cheap generic fan was just not cutting it anymore.
-
hamaga
> 3 daybonjour, j ai acheté le Noctua NF-A4x10 FLX, pour remplacer le ventilo monté dorigine sur le hp slimline 260 a112nf bref, y a pas photo le noctua est silencieux lautre ventilo bourdonnais légèrement en plus le noctua refroidis mieux que lancien quelque degrés de moins observé sur la sonde. le produit est bien pensé genre coussinet antivibration sur les trous de fixation, le produit sinspire des hélice de navire à 7 pales qui produisent une forte pousser et sont silencieux. je valide
-
Dave
Greater than one weekReplaced the old noisy fan in my cctv hard drive recorder box, only took 10 minutes and works perfectly, completely silent, excellent piece of kit.
-
B. Martin
> 3 dayOne of the fans on my Wanhao i3 Dup crapped out on me so I had one of these laying around from an old pc I no longer used. I replaced the fan and was so impressed I just ordered 2 more to replace all the fans to make the unit a lot more silent! Great fans great buy!
-
Giacomo B.
> 3 dayé una ventola bellissima....non fa rumore...niente, assolutamente niente. consiglio di istallarla subito perche non ce ne è una migliore..ps cè tutto per linstallamento
-
Claudio
> 3 dayOTTIMO PRODOTTO QUALITÀ PREZZO UN PIACERE FARE AFFARI CON VOI
-
JRFlurry
Greater than one weekThere’s an issue with both overheating and fan noise on the Arcade 1up Outrun cabinet. This little fan did the trick. You’re going to have to get slightly creative with wiring and placement but once you get it the cabinet is back to silent and the PCB will no longer suffer from heat issues.
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth Commutation Drivetechnology and Noctua’s reference class SSO2 bearings ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and a Low-Noise Adaptor and OmniJoin Adaptor Set, the NF-A4x10 is a premium choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 BearingThe NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. |
Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.
|
|
|
|
|
|---|---|---|---|---|
| NF-A4x10 PWM | NF-A4x10 FLX | NF-A4x10 5V PWM | NF-A4x10 5V | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin |
| Voltage | 12 V | 12 V | 5V | 5V |
| RPM | Max: 5000 / Min: 1000 | 4500 | Max: 5000 / Min: 1000 | 4500 |
| RPM with L.N.A. | 3700 | 3700 | - | - |
| Acoustical Noise | 19,6 dB(A) | 17,9 dB(A) | 19,6 dB(A) | 17,9 dB(A) |
| Acoustical Noise with L.N.A. | 12,9 dB(A) | 12,9 dB(A) | - | - |
| Size | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige |
Related products
