Noctua NH-C14S, Premium CPU Cooler with NF-A14 PWM 140mm Fan (Brown)
-
Kiefer L.
> 24 hourGot this with the NM-AM4 Mounting Kit for my R7 1700, the stock heat-sink wasnt able to cool my processor at stock clocks for some reason. Installing this heat-sink was a bit of a pain in the Corsair 100R Silent but is well worth it as with stock clocks my temps dropped to 1-2 degrees above ambient. I have been able to overclock my CPU with this to 3.9Ghz at 1.3625v but have settled with 3.8Ghz at 1.25v as the voltage jump was too much for me. Max temperature with the 3.8Ghz overclock is 75C with Prime 95 running for about 30 minutes and idling temperature is 30C.
-
Colleen Considine IV
> 24 hourUsed on a AMD Ryzen 5 3600 CPU in a Cooler Master NR200 case. Substantially lower temps on both idle/low load and stress test.
-
ALEX !
> 24 hourJe navais aucun besoin dun refroidisseur aussi performant, cest même un peu excessif pour mon usage personnel, mais je ne regrette absolument pas cet achat ! Je voulais surtout un refroidisseur de processeur qui soit silencieux et je suis servi. Mais je savais à quoi mattendre puisque tout mon système est équipé Noctua.
-
gulielmi2002
> 24 hourThis is a great cooler especially for the Cooler Master NR200 case. I have it mounted on a Asrock H470 ITX motherboard for an intel core i7 10700. the motherboard allows me to run the CPU at 125 W vs the stock intel 65 W. Noctua has this cooler rated for 205 W max but if you add a second fan in a push pull config, this will equal that of a NH-U12A or beat it just slightly. I have tested this cooler with both single and dual fans running handbrake; my CPU lives between 65 C and 70 C with a i7 running at 100% load at 125 W in single fan mode. with no bottom fan, I have easy access to the motherboard and ram. overall excellent air cooler. I was unsure if this could handle the task so I ordered an AIO with 280 mm radiator. that AIO has been return never being used because the NH-C14S is excellent at its job.
-
Reviewer 747
> 24 hourNot good enough for a i9 13900K, as the temperature spike uncomfortably high and the fans keep on spinning too fast with every other effort by the CPU, but very compact and probably great with processors that produce less heat. Go for the NH-D15 if you have a power hungry 13th gen top processor, those are up to the task in a well ventilated case.
-
Joe R.
> 24 hourIve used this same cooler on three different cpus 9900k 5800x and the 12700k and it worked very well
-
Reviewer with Integrity
> 24 hourQuiet and performance is great
-
lance liu
> 24 hourDidnt come with alternative mounting kit for AMD. You can only mount it horizontally.
-
Keith Pelletier
> 24 hourcooler très silencieux et efficace, possibilité de rajouter une autre fan..un peu volumineux par contre donc faire attention si vous avez beaucoup de RAM ou une grosse carte graphique
-
Ender
> 24 hourThis is a top notch product from a highly reputable company. Couldnt be happier.
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-C14S is a premium quality top-flow solution for the highest demands.
|
|
|
|
|
|---|---|---|---|
Low Profile ModeRun with the NF-A14 fan installed underneath the fin stack, the NH-C14S stands only 115mm tall, which is much lower than tower coolers with 140mm or 120mm fans and allows it to fit many desktop style or HTPC cases. |
High Clearance ModeRun with the NF-A14 fan installed on top, the NH-C14S provides extended clearance underneath the fin stack. This way, it is fully compatible with chipset coolers and RAM modules with heat-spreaders of up to 70mm height. |
NF-A14 140mm premium fanFeaturing sophisticated aerodynamic optimisations such as Flow Acceleration Channels, the NF-A14 is renowned to be among the best quiet 140mm fans on the market. Combined with the deeper fin stack of the NH-C14S, it allows the cooler to achieve similar performance levels as its dual fan predecessor despite only using a single NF-A14. |
NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds. |
C-Type top-flow design
The c-type top-flow design of the NH-C14S not only allows for superb quiet cooling performance while maintaining a much lower profile than today"s 140mm tower-style coolers but also ensures excellent airflow over RAM modules and near-socket motherboard components.
Measurements
- Height (without fan): 115 mm
- Width (without fan): 140 mm
- Depth (without fan): 163 mm
- Height (with fan): 115/142 mm
- Width (with fan): 140 mm
- Depth (with fan): 163 mm
- Weight (without fan): 820 g
- Weight (with fan/s): 1015 g
Material
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 1x NF-A14 PWM premium fan
- Low-Noise Adaptor (L.N.A.)
- Fan clips for second fan
- NT-H1 high-grade thermal compound
- SecuFirm2 Mounting Kit
- Noctua Metal Case-Badge
Socket compatibility
Intel LGA1700, LGA1200, LGA1156, LGA1155, LGA1151, LGA1150, LGA2066, LGA2011-0, LGA2011-3 (Square ILM) & AMD AM4, AM5