













Noctua NH-D15 chromax.Black, Dual-Tower CPU Cooler (140mm, Black)
-
Melodia Francesco
> 3 dayvengo da un nh-d14 usato per 5 anni su un 8700k overcloccato , quindi conoscevo bene le qualità dei dissipatori noctua , e il fratello maggiore mi sta dando anche più soddisfazioni
-
Brad Hepner
> 3 dayWith a medium sized case and a mini-ITX motherboard, it was tricky to install due to limited space but do-able. No worries of potential longevity issues with a liquid cooled system but this comes at a fan noise and realestate cost. The fan is very high quality and has great instructions. Would purchase again!
-
Andrew Reyes
> 3 dayLian Li Lancool 2, MSI B450 Tomahawk Max.
-
mohamed a.
> 3 dayIt wouldnt be fully compatible with Corsair Vengeance RGB PRO RAM. I had to turn the fans up high so there was no friction between them and the pieces, but the aerator is great. Temperature with the Ryzen 5800X sleeps under 38C and presses below 65C.
-
Daniel
> 3 dayI really liked this cooler. it’s probably the best performance cooler you can get, but it’s big, because of this you have to be very careful with your clearance, specifically your ram, I had Corsair RGB ram that extends more than most ram cards, and while the heat sink itself was able to clear the ram, I wasn’t able to make the second fan fit. It also made it very hard to reach some fan headers my motherboard had. I ultimately had to return this cooler as I didn’t want to return my RGB ram. Ultimately if you’re looking for straight up performance this is your best pick. But if you’re looking to show off your build you’re probably better off with a liquid cooler. I would Just recommend you use low profile ram. I also think they should shrink the secondary fan so it lines up with clearance rise in the heat sink, this would make this cooler a lot more compatible with different rams. Anyway hope noctua makes their own water cooler one day.
-
Someone
> 3 dayThis company knocks it out of the park. Thought I would be good with the AMD stock cooler as it seemed pretty decent but the noise was unbearable. This thing is like almost completely soundless and it cools a lot better as well. Good investment. Will buy another of this brand in the future.
-
Lupus Berlin
> 3 dayWer dieses Produkt kauft, weiß was er bekommt!! Keine lautlose, aber eine ruhige, effektvolle Kühlung. So stelle ich mir das vor.
-
J. A. Orr
> 3 dayI bought this because I read it was compatible with all LGA-1700 chipset boards. Well, unfortunately, Asus has made it difficult on fan producers in building their ROG Strix Z690-E MBs with high heat sink / covers surrounding the CPU. Even with the upturned heatsink pipes of this cooler, there is contact. Slight contact would not have been bad, but it bad enough that the unit sat crooked on the CPU noticeably when cinched down as per the directions. Determined, I used an adequate amount of thermal paste, so when operating the unit after assembly, the CPU cooler worked fine, and kept the CPU at 31 deg C. Through all the stress tests, this cooler did great, despite being slightly leaned over. I gave this a 4/5 rating because it was easy to install, well made, quiet, and worked awesome. Assembly and fit however lost a point. Not their fault I suppose, except that the unit is labeled as working with LGA1700 MBs. And it does not fit on my 1700 chipset. When I checked it after a while, I could see the edge of the MB made a definite mark in the tubes where contact was made. The Asus heatsinks have a sharp edge. So I removed it.
-
James Ball
> 3 dayMake sure you have a case big enough to fit this.
-
FXDawg
> 3 dayIm not a gamer, Im a cad/revit modeler. I was a little concerned that its air cooling but its been great. It is big so you need a big case.