Noctua NT-H2 3.5g, Thermal Computer Paste incl. 3 Cleaning Wipes (3.5g)

Parto col dire che la mia recensione può risultare falsata visto che è stata la sostituta di una pasta termica di 5 anni fa. Ovvero ho fatto il cambio pasta termica alla GPU aveva ancora quella stock di 5 anni fa bhe che dire era una 2060 castrata perché arrivava in esercizio a temperature sopra gli 83 °, avevo limitato il clock e la potenza massima per non farla scaldare. Risolto ora sbloccata ed in esercizio non va oltre i 69° dove prima ne faceva 84

Pasta termica dalle prestazioni eccellenti a un prezzo più che adeguato.

I bought this compound to replace the stock thermal paste in my Dell Precision 5530 laptop after having some trouble with the cooling reading recommendations that I do this. I had first tried to do so with some cheap paste I had kicking around, however this made little to no difference. With a healthy dose of skepticism, I decided to pay a little more for a premium thermal compound and figure out once and for all if there really is a difference. My testing wasnt particularly controlled, but I can say for sure, there is an appreciable difference. While idle temperatures didnt really change, I could tell from the off that the stability of my temperatures was drastically improved. Rather than seeing temperatures jumping around maybe +- 10C, I was instead seeing +-1C. I guess this indicates the effective thermal mass of the chip and its cooler was drastically increased. This was more evident with temperatures under load where, as well as the improved stability, the actual measured temperatures were significantly lower, in the region of 10-15C lower. I cant be sure if this is a measure of how good this thermal compound is, or how bad the stock / generic stuff is, but I can say this is significantly better and seems to be a quality product.

Nach 18 Monaten war es mal langsam so weit und ich öffnete meinen Alienware M17R3 um dann festzustellen, dass er nicht Mal so verstaubt war wie ich bei den Temperaturen und Lüftergeschwindigkeiten angenommen hatte. Nachdem ich das Mainboard befreit hatte würde schnell klar, dass die verwendete Wärmeleitpaste von Dell Müll war. Diese hatte sich fast komplett zu den Seiten rausgedrückt und der Kern lag an einigen Stellen fast frei.

transmission de la chaleur bien meilleure que la nt-h1

Greatly reduced the thermals of my 1.6 years old Legion Y540s i7-9750H.

Can’t go wrong with Noctua

ok

Id say its second or third to Thermal Grizzlys Kryonaut. Great performance on a watercooled Threadripper system. 55W at idle and temps are around 29 C (About 5 C above ambient). Havent tested if it cures or dries as it hasnt been in the system that long. A little pricey compared to the NT-H1, but I wanted to see if I could squeeze out a few degrees as Threadripper is a big chip.

Dicono sia una delle migliori... io lho trovata molto collosa e difficile da stendere bene. In compenso ne basta veramente un micron, con questa siringhetta potreste fare almeno 20 cambi di pasta termica su un notebook, se non di più