NotoCity Compatible Fenix 5X Band 26mm Width Soft Silicone Watch Strap for Fenix 6X/Fenix 7X/Fenix 5X Plus/Fenix 6X Pro/Fenix 3/Fenix 3 HR/Tactix/Descent MK1/D2 Delta PX/D2 Charlie-Black
-
Bibber
Greater than one weekExactly as advertised, even came with mini screwdrivers for adjustment, although they weren’t required for installation. Took seconds to connect to watch face.
-
D. Burns
> 3 dayI needed a new band but did not want to spend $40 for an OEM. This is a great replacement band and (so far) seems as durable as OEM. I got new band because I got paint all over the original. Claps seem durable and fits just as nicely as OEM. Only had about a week or so but no issues nor do I expect any.
-
GMANG
> 3 dayThis product has all you need included to replace your worn or broken band. I was very impressed with the band, tools and quickness of delivery. If you are in need of a replacement band - buy this one!
-
BD
> 3 dayGood band for the price and overall comfort is good. The end sticks out further than EOM band, but overall price point is great for what you get. Update: after about 2 months of daily wear, one of the excess band holders popped while putting on. The band still works with the holder with the nun on the end of the excess, but disappointed it didn’t last long.
-
Norman
> 3 dayCertainly works. That said removing and replacing the band (when putting on the longer band for diving) is harder than the factory band. Not a deal breaker but mildly annoying.
-
WUCV
Greater than one weekI would recommend this belt. Good quality. Easy to attach and comfortable to wear though out the day.
-
Glen
> 3 dayA near exact copy of the Garmin 26mm bands. Externally, it looks JUST like the OEM bands. The quick change clip feels the same and most importantly, the silicone has the same feel / stretch that the OEM does. The slight stretch is especially important for HR training while running, etc as I need to be able to tighten the band beyond what I normally have it set at to as need no bounce and the resulting accurate HR readings. This does it just like the band that came with my Fenix 5x. Additional bonus, Road ID Fenix 5x emergency ID fits just like it did on the OEM.
-
W. Griffiths
> 3 dayMy Garmin Fenix 3HR band was in desperate need of replacement and these fit the bill. They are of excellent quality and fit perfectly. Made of a soft-feel silicone, these are a huge improvement, in feel and comfort, over my original band. They clip on very securely and I do not foresee any issues with the spring loaded connectors/clips. Time will tell. Will I buy these again / more of them? Absolutely. Great product at an even greater price point.
-
Collin Rippin
> 3 dayEasy to snap onto watch
-
Ramón Baldovinos
> 3 dayMuy buen producto muy cómodo y fácil de instalarlo , 100% recomendable
Product Note:Fit for 26mm Garmin Fenix 5X/Fenix 5X Plus/Fenix 6X/Fenix 6X Pro/Fenix 3/Fenix 3 HR/Descent MK1/D2 Delta PX/D2 Charlie Smartwatch.
Q1: How to avoid buying a strap that doesn"t fit?
Before you buy, please pay attention to your watch model: (It is easy to get confused about whether there is an "S" or an "X" or an " ".)
- The back of the watch(Fenix5x/5x plus 、Fenix 6x/6x pro 、Fenix 7x 、Fenix 3/HR、Descent MK1、D2 Delta PX、D2 Charlie)
- The screw with(26mm)
- Band mark(quickfit 26)
- Watch manual, outer packaging
Q2: Why sent a hex screwdriver but the band itself needs a small Philips screwdriver?
We do provide the screwdrivers, it"s used for the watch models that didn"t come with a original quickfit watch band (such as fenix 3/3 HR).
So they can use it to remove the old band.If your original watch band is a quickfit one, the screwdrivers are useless for your watch.
You could install it directly.
Installation Steps:
- Step 1. Push and hold the button in the connection part.
- Step 2. Put it into the connection pin and release the button.
- Step 3. Lock the other side to the watch. Finished.
|
|
|
|
|---|---|---|
|
No extra screws needed, Just put on or take off the band by your hands. |
Premium Stainless Steel Material.Make your watch a fancy decoration. |
Clasp with screw spring bar，new version，more durble. |
|
|
|
|
|---|---|---|
How to determine the model of your watchPlease check the back of the watch and the logo on the back of the strap, which is marked with the 26mm strap model |
No tools required for installationWe provide 2 torx screwdrivers, it"s used for the watch models that didn"t come with a original quickfit watch band (such as fenix 3, fenix 3hr) |
You could also confirm the model of strap you need by widthIt is easy to get confused about whether there is an "S" or an "X" or an " ". |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Fenix 5X Plus Band | Fenix 5X Plus Band | Fenix 5X Plus Band | Garmin Fenix 6X Band | Fenix 6X Pro Band | Fenix 7X Band | |
| Band Width | 26mm | 26mm | 26mm | 26mm | 26mm | 26mm |
| Compatible Models | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie | Compatible with Garmin Fenix 5X,Fenix 5X Plus,Fenix 6X,Fenix 6X Pro,Fenix 3,Fenix 3 HR,Descent MK1,D2 Delta PX,D2 Charlie |
| Material | Soft Silicone | Soft Silicone | Soft Silicone | Soft Silicone | Soft Silicone | Soft Silicone |
| Easy Fit Mechanism | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
