NSI Industries TORK WFIP2 Smart Dual Plug - Indoor Standard Wi-Fi 3-Prong 2 Outlets Plug - Compatible with Alexa and Google Assistant - Remote Access with Smartphone/Tablet App - No Hub Required

Both sockets are on one controller, so Im not sure that I wouldnt rather have a smaller unit with only one socket. The app on the iPhone is easy enough to setup and use, but you need to create an account with them. Not sure why. No login and a smaller single socket design or ability to control each socket would have resulted in five stars.

I’ve tried a few of these WiFi outlets and this is definitely one of the better ones. It’s a pretty straightforward concept, plug in, pair, and configure to your liking. I had no issues with pairing and I got it to configured to some mood lights in our entertainment center. I’ve even been able to configure this with voice commands However the commands are pretty limited, mainly turn on and off. I’ve been unable to get it to dim. I would have loved the ability to integrate it with apple home app but I’ve been unable to. Overall, it’s a solid plug and works well with the apps it can configure to.

JUST BUY AN ALEXA !! Pain no in the ass to connect to alexa

This plug is smarter than my house . It may also be smarter than me. Works with our kitchen and LR lights, but not others; works with our ceiling fans. Easy to plug in and set up. Next time I go smart anything electronic Ill call our son or grandnieces. I rate it a four.

This is perfect for something like turning on and off two nightstands as this has two outlets. It also is three pronged, for devices that have a ground connection. This does require to setup an account under the Tork app. I was able to link it to my Google home and create a name to turn it on and off. Nice wifi outlet that doesnt take up very much room.

This thing is great and works as advertised. Setup was super easy, the instructions are a little light, but you dont need a whole lot. One bit of advice is it says to hold the button for 30 seconds to reset it and the light will blink. When I first turned it on the light was already blinking so I thought I was good. Not so much, I couldnt get it to recognize at first. It was blinking green only when I first turned it on. Once I held the button for 30 seconds the light flashed greed and red at the same time, and I was able to proceed and finish setting it up. The whole process took about 10 minutes including getting it out of the box, and 3 or 4 minutes of that was waiting on it to download and install a firmware update. The App works OK, I didnt/dont use it once setup is complete. It was easy to add to google and I can control it with google just fine. I did not try Alexa (sorry Amazon) but I expect it would be just as easy. Be aware that the two outlets are switched together. Thats exactly what I wanted, so just be aware of that. In my particular case I use it to turn off/on my AV receiver in the basement that loses sync with the TV every now and then. It works great for that. Being a piece of AV equipment I was a little worried about noise and if the device had enough power capacity. Turned out theres nothing to worry about. It handles a large AV receiver just fine and does not add any noise to the circuits. (Im super picky about that.) All in all its inexpensive and does what it says with no fuss. Thats a win. Oh the picture above is the device in the google home app. Dead simple.

This was very easy to set up and get running. We have been using it for over a week now with absolutely no issues. It is great being able to turn the lights on before pulling into the driveway.

Absolutely LOVE this! We initially used it in the living room for area lighting, and moved it to the bedroom. It works awesome with Alexa, and being able to to turn on any device while we are away adds that extra level of we might be home, we might not.

The first thing you have to know going into this is that this is ONE remote outlet with two plugs. That is, it offers two places to plug in and control as one unit, and not independently like some multi-outlet WiFi plugs. I have a pair of plug in light fixtures above my living room book shelf that are the main lights for that room. In the past, I used a timer with an extension cord so that I could have two plugs (one for each fixture) coming out of the single outlet. With this, I can easily plug both fixtures directly into the smart plug which eliminates the mess of wires that used to be required behind the shelves. As long as you go into this knowing what it is (dual plugs attached to one remote control), I think you will be happy with the performance of this product. If you need two independently controlled outlets, this isnt the product for you. For me and my setup, it works well.

This wifi plug works well with Google Home. I needed to download the vendors specific app, and put it onto my 2.4Ghz wifi network, then I could sync it with Google Home and so far it seems to work fine. Since this is a dual plug with the plugs on the sides, it does take more room than a single plug would -- just be sure you have enough room for it. It seems well made, but I will update this review if there any problems in the future. ** I received this in exchange for a review, but the review is based on my own experience with the product.**