OMT SAE Tap and Die Set Standard | #4, 6, 8, 10, 12, 1/4, 5/16, 3/8, 7/16, 1/2 Tap Set and Die Set | Thread Repair Kits for Threading and Rethreading Internal and External Threads

Ive only used it once to clean up damaged threads on my trailer hitch stabilizer and the 1/2 bolt. It performed superbly. A great addition to my workbench.

Works as advertised. Perfect for my needs. I had to ream out five stripped 1/4x20 nuts and bolts. It was a simple and easy thing to do with this set. Highly recommend it. More importantly the price is right for the value!!!!!!!!!

I bought this set to thread straight rods. I have wasted hours trying to get the 1/4” die to thread a 1/4” rod. It simply does bot do the job it was intended for.

Arrive damaged. Pieces all over the place when open. Which was probably cause one of the pieces to break.

It is what you pay for. Nice cheap little set.

Excellent product!!!

It sorta works. At least the #10-32 didnt work. I ran it through an alloy steel to chase some threads and after 2 passes, the screw still didnt go in easy. Ran 1 pass with another tap and it was perfect. These taps dont really loosen up after you cut your threads. Youll feel that with a good tap and unfortunately this isnt that type of kit. after 3 passes or more, you can probably force your screw in. (I Used tap magic and blew out hole with air after every pass.).

Get more pieces than store at the same price.

These taps act like a reaming tool instead of tapping. I tried taping three holes and out of the three, only one actually taped and with poor-quality threads. All the taps are bowed and wont cut straight threads. I had to fill weld all the holes, redrill and tap each one. These are not worth the headache created or loss of time, spend your money on a good set and save yourself headache and time.

The material is not worth it and he’s not good very weak