



Outdoor Smart Plug, Works with Apple HomeKit, Siri, Alexa, and Google Assistant, Refoss WiFi Outlet with 2 Grounded Sockets IP44 Waterproof, FCC & ETL Certified
-
Rich
> 24 hourThe instructions say to use the eHomeLife app for iOS to work with Google Assistant. But the eHomeLife app only works with Alexa. You need to use the Meross app to work with Google Assistant. Here is how I got it working with Google Assistant and my Google Nest Hub... Note that the Meross app connects the plug to the Apple Home app but then asks you if you want to link it to Google Assistant. After linking Google Assistant with Meross, run the Google Home app and tell it to look for new devices. Do this... Tap on the Settings Icon Tap on Add device Tap on Works with Google Tap on Meross Tap on Check for new devices Then set a routine... Go to routines and tap the + icon Tap Household Edit the name Tap on Add Starter, When I say to Google Assistant (whatever you want) Tap on Add Action, Adjust Home Devices, Outtlets Look for your outlet in the list.
-
Vince
> 24 hourI didnt know the brand so I didnt have big expectations, but this device works perfectly. I was able to add it to HomeKit within 5 minutes from unboxing. Pleasantly surprised also that I can separately operate the two outlets.
-
Chuck Townsend
> 24 hourPurchased as a replacement smart plug to control outdoor water feature. The Apple connection was difficult to configure. Tried briefly to use Amazon but soon gave up. The Meross utility worked fine.
-
dannyebonilla
> 24 hourNot the first “HomeKit” device I’ve had. Clearly no real integration.
-
John
> 24 hourI was looking for a controllable outlet to run some outdoor fountains and lights and decided to give this a try. This plug supports Apples Homekit automation which is a nifty feature that Ive been wanting to experiment with. Setup is easy, just scan the QR code on the side with the Home app and it registers. There doesnt seem to be a way to connect it to a WiFi network other than the one your phone is on - Homekit seems to assume people only have a single SSID which I guess is probably true for a lot of people, but unfortunately it isnt true for me. It only connects via 2.4GHz WiFi, similar to other IoT devices I have. In the Home app outlets are individually controllable and you can set up automations and scenes to control the device. This Refoss brand plug is actually just a rebranded Meross MSS620 which is how it identifies itself when connected to Homekit, and the manufacturer is identified as Chengdu Meross Technology Co, Ltd. According to my firewall the device is pretty innocuous as IoT devices go. It advertises itself to the local network via Bonjour, gets time from the North American NTP pool servers, and phones home periodically via MQTT (the IoT control protocol) to mqtt[dot]meross[dot]com. Its unclear whether MQTT is used for automated firmware updates or something else. Meross might have a way of remotely controlling these devices which is why I generally try to firewall these types of devices from my main network. However, with Homekit you need to have them on the same network as your iOS devices which makes securing them somewhat difficult. Ive not tested range or the IP44 waterproof rating. Given that the instructions basically say dont get them wet if the outlet seals arent in place I wouldnt bet that this is all that water resistant if youre actually using them so this gadget is going to go in a location where itll always stay dry. Assuming the range is adequate thisll work fine for controlling stuff on our patio when it comes time to install that stuff. Ill probably get a second one down the road.
-
Danner
> 24 hourWorks perfectly, even though the company name is different, it’s Meross. Ordered two. One connected perfectly right away. The other one shipped with a bad HomeKit QR code/wrong 8 digit code (actually had 10 digits and letters….) while this was frustrating, I’m rating at 5 stars due to the customer service. They were able to get me a proper QR code after reaching out to them. Each individual outlet can be controlled which is great as well. Using to lower Christmas lights on house/in yard.
-
D. Podschadel
> 24 houreHomelife app is easy to use on the android phone. Easy to add the new plugs to the app. Works in the the home wi-fi and while outside the area.
-
Hugo Hernandez Jr
> 24 hourBought this to connect my outdoor light chain. Easy to setup and configure in HomeKit!
-
Allen Carpenter-Rickert
> 24 hourConnect this to your WIFI program and forget about it. It just works, and it works well! I use it for the Home app, so I dont care if it works well with alexa......
-
Erick H&H
> 24 hourI like the way it’s for outdoors and it’s easier to link it with My Home Apple’s app but I got tired trying to link it to Alexa. In my case I had to change my wifi password and that messed it up