OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
JW
> 3 dayAwesome
-
Kid Bleu
> 3 dayIt does what its supposed to, and very well. Installed with a Samsung SSD in a 2012 6-Core Mac Pro 5,1, and it runs beautifully. Highly recommended.
-
Damian Medhurst IV
Greater than one weekAs advertised
-
CityStreetz
Greater than one weekWorks as intended.
-
John
> 3 dayIt’s a great product. It does exactly what it is advertised to do.
-
Kluntor Boogie
> 3 dayPerfect fit for my 09 Mac Pro . With these sleds were $9.99 instead of $17.50, but at least they arent the $20 rip off that Mac users sell the oem ones for
-
John Galt
> 3 dayThis was what I needed to add an SSD to a Mac Pro
-
Eric W Lieberman
Greater than one weekWorked exactly as expected
-
MorganR
> 3 dayTwo of the screw mounting holes are as expected, two are partially open, which isnt great. What I do like about this 2.5 disk sled is that its open to the air (much better cooling).
-
Rob
Greater than one weekPurchased this OWC Mount Pro to add an SSD in a mid-2010 Mac Pro 5,1. The two mount screws along the rail work perfectly, the other two aren’t as secure, but since SSDs are so small and lightweight, this seems like a stable enough solution. I think the OWC blue makes it easy to identify which bay the SSD is installed in later. Likely going to order again for additional SSDs in the future.
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
