OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro

(0 Reviews)

Price
$12.42

Quantity
(10000 available )

Total Price
Share
195 Ratings
176
11
4
2
2
Reviews
  • Richard Maier

    > 3 day

    Just what I needed to add a SSD to my aging Mac Pro 4,1. Just use the four included screws to attach a 2.5 SATA drive and slide it into one of the Mac Pros drive bays. Blue color lets you know which bays have SSDs at a glance.

  • Dan Bach

    > 3 day

    Used if in my 2012 Mac Pro. I purchased it to mount a full-size hard drive and it lacked the second set of screw holes to mount the drive. I ended up using gaffers tape for stability.

  • Lamont

    > 3 day

    Easy to set up

  • M. Dorsey

    > 3 day

    Easy to install and just a little bit pricey, IMO. After installing it makes closing the side panel latch hard. I think the safety latch slot must not be quite right on this adapter. It closes, but with great effort and it makes me think something is wrong.

  • raman bhardwaj

    > 3 day

    perfectly fits inside MacPro 5,1 hard disk slots and perfectly holds the OWC SSD hard drive. Its fairly easy to fit the ssd into the mount and just push the mount into the HD slot in Mac pro.

  • Sam

    > 3 day

    Great adapter for SSDs. But the price on Amazon is a complete rip. Buy directly from the manufacturer.

  • DEH

    Greater than one week

    It works well and is an easy install. The second that I have bought.

  • T Zero

    Greater than one week

    Too long for older Mac Pros. Dont try bending it. It breaks. May be able to be cut, but it wouldnt leave much.

  • Artaeffex

    > 3 day

    Arrived and worked as expected. Thank you.

  • cichlid

    > 3 day

    Worked perfectly. Easy to install. I could have used a picture or two so I could telll what side faced up.

OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro

Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!

While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).

The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.

Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.

Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
 

The Mount Pro is compatible with...
 

  • Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
  • Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
  • Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
  • Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
  • Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
  • Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
The Mount Pro is not compatible with the following Mac Pro models.
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
 
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
 
 
 
 
 
 

Related products

Shop
Dream Store
Dream Store
( 1361 Reviews )
Visit Store
Top Selling Products