OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Frank C. Okusako
> 3 dayI like the simplicity of this device. Really easy to put together. Nice fit, too.
-
Rene Runolfsdottir
> 3 dayThese really beat the sort of makeshift adapter that OWC had for their SSD drives before. I love these. Easy to install, and the fact that they’re blue tells me which of my drives I have replaced, which helps me stay organized. These are a no brainer.
-
Hans
> 3 dayTook all of 2 minutes to install on my 2010 Mac Pro 5,1.
-
Richard Maier
> 3 dayJust what I needed to add a SSD to my aging Mac Pro 4,1. Just use the four included screws to attach a 2.5 SATA drive and slide it into one of the Mac Pros drive bays. Blue color lets you know which bays have SSDs at a glance.
-
Test4echo3
> 3 dayWorks as advertised!
-
craig
> 3 dayWorks flawlessly. Adding a 2.5 SSD to my aging Mac Pro tower gave it new life. Thanks, OWC!
-
Andre Scott
> 3 dayproducet is really good..serving its purpose..
-
Tallman
08-06-20252010-2012 Mac Pro computers can run Sierra and High Sierra quite nicely with the read/write speed boost of an SSD. Add a compatible graphics card (Radeon RX 580) and Mojave is an option. The OWC 2.5” sled is the easiest way to go.
-
M. Boorman
> 3 dayPlanning to go to higher capacity, lower performing SSDs in my 2009 Mac Pro. These are perfect for the job!
-
Biba
> 3 dayThis products is best and cheaper solution to feet your SSD to MAC PROs . Not all adapters for SSD will give you possibility to mount SSD in MacPro , they dont much a mount points . So get this item if you Mac Pro .
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
Related products
