OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Frank Rudolf
> 3 dayGuter Festplattenschlitten für eine SSD im MAC Pro 5.1. Gut verarbeitet und klare Kaufempfehlung
-
Jose Carlos Estrada
> 3 dayMuy buen servicio, llegó antes de tiempo, muy bien recomendado
-
Joe Brown
> 3 dayPerfect fit
-
Phil A
Greater than one weekSlid in like it was OEM
-
Bruce in Texas
> 3 dayI recently got a used 2009 Mac Pro in which some idiot had thrown away the old hard drive WITH the mounting bracket. But the brackets were all for 3 1/2 drives anyhow, and I wanted to put in a SATA SSD as a boot drive. Havent got the drive yet (too busy doing all the other upgrades), but the bracket slotted right into the hole. The blue color definitely stands out. I think I like it.
-
Adam G
07-06-2025I have ordered for my Mac Pro to upgrade into SSD, installed, works fine.
-
Jesse
> 3 dayQuality product for use in my Mac Pro 5,1.
-
M. Dorsey
> 3 dayEasy to install and just a little bit pricey, IMO. After installing it makes closing the side panel latch hard. I think the safety latch slot must not be quite right on this adapter. It closes, but with great effort and it makes me think something is wrong.
-
Wes Miller
> 3 dayworks as expected cool its anodized.
-
Jimi
> 3 dayFit like a charm
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
Related products
